Fronty4x4spares...Quality Used Parts, rapid delivery.

[vauxsqueeks]

Any chance you have #7 & #8 available?

[Hawkmoon]

ok cool!
Yes, the parts still needed!
(Slowly getting me beast'y back to default!
Only a couple things left to check ... that is when I get around to them, there all cosmetic so far for the most part!)

Yep...got the bits you need...please drop me a pm with your address and I can work out a price for you with postage.

Cheers
Greg

... addition!
Hi Greg,
Can you have a look to see if you have a wind screen wash bottle motor, seems mine has runs but the impeller has dropped off so doesn't draw water!
There are two motors on the bottle, I'm guessing they are the same, but just in case they are not, the one I need is the one nearest the engine bay!

Oh! and while I remember, thanks for the Air box, (via Vauxsqeeks) its looks good, and actually better than the K&N filter that it replaces!
LOL!

[snapper]

Hi Greg

Tis time to change the rear bushes so to speed the job up a bit I'm after a set of trailing arms for a 2.8 (both lower ones and the smaller top one) I can then re-bush those and do a quick swap over.

Do you have any and how much please mate?

Add a Panhard Rod to that as well please

[Fronty4x4spares]

Any chance you have #7 & #8 available?

Yes mate have these for you...

[Fronty4x4spares]

ok cool!
Yes, the parts still needed!
(Slowly getting me beast'y back to default!
Only a couple things left to check ... that is when I get around to them, there all cosmetic so far for the most part!)

Yep...got the bits you need...please drop me a pm with your address and I can work out a price for you with postage.

Cheers
Greg

... addition!
Hi Greg,
Can you have a look to see if you have a wind screen wash bottle motor, seems mine has runs but the impeller has dropped off so doesn't draw water!
There are two motors on the bottle, I'm guessing they are the same, but just in case they are not, the one I need is the one nearest the engine bay!

Oh! and while I remember, thanks for the Air box, (via Vauxsqeeks) its looks good, and actually better than the K&N filter that it replaces!
LOL!

We have washer pumps if you are needing one...

[Fronty4x4spares]

Hi Greg

Tis time to change the rear bushes so to speed the job up a bit I'm after a set of trailing arms for a 2.8 (both lower ones and the smaller top one) I can then re-bush those and do a quick swap over.

Do you have any and how much please mate?

Add a Panhard Rod to that as well please

Have lower trailing arms and panhard rods Frank, but will need to source the top link of the next coiler breaker.

[Hawkmoon]

Top guys!
Much appreciated, confirmed Wednesday, paid and sent Thursday, arrived Friday morning...I was at Cadbury world, but had most of the bits fitted 10 mins after we got back with arm fulls of chocolate!

[gregster]

Thanks for the feedback, and glad you were pleased with your parts...

Anything else you need, please give us a shout.

Cheers

Greg n Rob

[Hawkmoon]

Any chance you have #7 & #8 available?

Yes mate have these for you...

Cool...fingers crossed we'll not need them!

[gregster]

Did you want those bits posting Mr squeaks, or did you wanna collect at the weekender?

[vauxsqueeks]

Did you want those bits posting Mr squeaks, or did you wanna collect at the weekender?

Hi Greg,
Spent a few hours on it today.. Ended up drilling the screws and using a remover tool with a reverse thread spindle thing. Parts were a backup plan, now not needed.there is some other parts, I will try to list asap for the weekender.

[ianoneill1981]

do you have any bash gaurds available for a b series? i managed to bust my plastic one at the weekend .

[gregster]

Did you want those bits posting Mr squeaks, or did you wanna collect at the weekender?

Hi Greg,
Spent a few hours on it today.. Ended up drilling the screws and using a remover tool with a reverse thread spindle thing. Parts were a backup plan, now not needed.there is some other parts, I will try to list asap for the weekender.

Cool...well done fella...

[gregster]

do you have any bash gaurds available for a b series? i managed to bust my plastic one at the weekend .

We have some of the plastic OE bash guards, which one/ones do you need?

[ianoneill1981]

cheers

it's the second one from the front that i need posted to dd2 5at

[gregster]

I will have a look for you and price it up with postage.

[Bearcat]

Hi, I am still looking for an oil temp thermostat for a 2.3TD complete with filter housing and hollow bolt if poss. I was wondering if the 2.4i has the same oil cooler set up ? to widen the availability. I also now need a LHR outer door handle ( dark grey couler). I am travelling to UK via Dover early September if collection is possible, cheers.

[vauxsqueeks]

Hi,

Would you happen to have an EGR for a 2.2 DTi?

[gregster]

Sorry Mr Squeaks we dont have one of these, but we do get asked for them about 5 times a week so you are not alone in seeking one....

[gregster]

Hi, I am still looking for an oil temp thermostat for a 2.3TD complete with filter housing and hollow bolt if poss. I was wondering if the 2.4i has the same oil cooler set up ? to widen the availability. I also now need a LHR outer door handle ( dark grey couler). I am travelling to UK via Dover early September if collection is possible, cheers.

Hi, Havent got much in the way of 2.3 engine parts at the moment, we havent broken one for ages, but should have a door handle. Collection is fine, we are in just off m20 j7.