by snapper on Wed Jul 04, 2012 8:53 pm
Tried the halfords one when removing a very stuck side-step mounting bolt, not sure if it did the trick or not tbh cos I also sprayed a load of wd40 over it, went for a brew then came back, put a mtr long breaker bar on it, lent in some tension on the bar and then gave the chassis next to the bolt a proper belting with mr lump hammer. Unsurprisingly it came loose.
This posting may have been helpfull, on the other hand probably not... Either way, I may have had drink when posting it in which case it's probably not as helpfull as it could have been
Work safe, and remember all technical problems can be resolved with a hammer, the trick is knowing where to hit it and how big a hammer to use (I often find it may also help to have a spare bit in the shed to replace the bit you have just mullered

)
Work in Progress (or not as the case may be) I give you....
'O-no' the truck.Comments on 'O-no' the truck may be left
hereWork in Progress (or not as the case may be) I give you....
'Truck'Comments on 'Truck' the truck may be left
hereOwning a 2.8 is a hobby in it's self...