Technical help and advice wanted please?

[Sir-Doris]

When the timing belt was replaced was just the belt replaced or was it a timing belt kit with rollers etc?

[fogman]

[lloyd]

[lloyd]

[fogman]

no mate its sitting on the drive untill i can be bothered to get it sorted out, its advisable not to drive yours incase it gets very low on coolant & overheats, that might cause you to have more problems , i dont really do long trips in mine its just normally running around town so luckilly mine never got hoter than its normal running temp !

[Sir-Doris]

[plee1974]

Hi Lloyd sorry to hear of your troubles i know i sound like a rep for this company but let me assure you i`m in no was affiliated with them.
This stuff costs about a tenner and you`ve nothing to lose but if it works major savings to be made ...
http://www.kalimex.co.uk/section.html?secpath=01.04.&pgid=17
I will personally vouch for this stuff much better than radweld.
Here is some other ppls testimonials for this stuff http://www.kalimex.co.uk/section.html?secpath=01.04.&pgid=37

Hope this helps

Paul

[lloyd]

Thanks for that mate. My local stockist is only 300 yards away and as you say I will only lose a tenner at worst.......Cheers.

[plee1974]

No problem let us know how it goes

Paul

[lloyd]

BLOODY HELL!!!!

It's fixed!!!! A bottle of the stuff went in plus a litre of coolant......then test drove for thirty miles. Got to normal operating temperature, billowing started. Five miles later no billowing, interior heater working, temp erature stable. After the test drive I rechecked coolant level and it was 5mm from filler cap top. Sorted. Thanks, guys.

[Rifleman]

5mm?????
Thats too full surely.

[fogman]

quality lloyd can you keep us posted with updates please cos it would be interesting to see how it goes with that stuff in it ?

have you had it up to running temp again since ? if not when you do is there any smoke at all ?

[plee1974]

Told ya that stuff was quality




Paul

[Drift]

I banged that in a Rover I was part exing with a suspect head gasket to a dealer many moons ago.

I wouldnt use it in my car, it can block water galleries and is only a temporary fix at best, its better to fix the cause rather than stick a plaster on it.

I know it sounds harsh but just dont want further damage to occur on your motor.

[lloyd]

[fogman]

i was thinking about trying it myself if you had good results lloyd but i think drifts post has made me think again cos its probably only going to be temporary & it could cause further problems & so more expense in the future, im thinking heater matrix for 1 & if that gets blocked its a total dash strip out to replace it so i think ill get mine done again with a better quality h/g this time

but good luck mate & keep us posted

[plee1974]

i bought this stuff and added it to my cooling system nearly 4 months ago and there has been no problems with any clogging up of any pipes and i`ve not had to top up my coolant since then either

Paul

[lloyd]

On a slightly different note, I wonder whether the injection of water into the combustion pots might raise compression and boost performance, as nitrous oxide injection does?

[Sir-Doris]

[plee1974]

Its been 3 days now Lloyd Hows it going???

Paul