on our trucks whilst the help and know how would be there. I was thinking of the coil spacers and the torsion wind up, would that be possible or
would it be too big a job for that environment??
The PITS at Bala
39 posts
• Page 1 of 2 • 1, 2
The PITS at BalaWhilst we are all at Bala for what is going to be a GREAT weekend
on our trucks whilst the help and know how would be there. I was thinking of the coil spacers and the torsion wind up, would that be possible or would it be too big a job for that environment?? Ramsgate, Kent
![]() Never Imitated Often Battered
Re: The PITS at BalaI know a little fettling will be going on, only simple stuff as we cant be replacing engines and fitting clutches
If there is level ground I see no reason why a few torsion bars cant be tweaked just bring the 27mm socket and the breaker bar Ste
FOG Administrator Frontera Technical Support Often Imitated Never Bettered http://www.fronteraowners.co.uk ![]() Its here, the FOG Annual Meet 2014 viewforum.php?f=123
Re: The PITS at BalaI can't recall the being any hard standing, but I dare say running repairs will be attempted.
Lawrence
Re: The PITS at BalaYou have the fluid, it shouldnt be a problem.
Ste
FOG Administrator Frontera Technical Support Often Imitated Never Bettered http://www.fronteraowners.co.uk ![]() Its here, the FOG Annual Meet 2014 viewforum.php?f=123
Re: The PITS at Balai mean the cylinder itself mate hopefully will have one by then but i presume it wil need bleeding??
Re: The PITS at BalaYes it will, but remember we are all there to enjoy ourselves and have offroad fun to, so simple quick jobs
Ste
FOG Administrator Frontera Technical Support Often Imitated Never Bettered http://www.fronteraowners.co.uk ![]() Its here, the FOG Annual Meet 2014 viewforum.php?f=123
Re: The PITS at Balai know mate it doesn't look too tough to do bolts on bulkhead pipes then pedal that should be it
Re: The PITS at Balaflying solo, weeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
Re: The PITS at Balaflying solo, weeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
Re: The PITS at BalaWhile i'm helping Trugga to set up the RTV course in weaves tractor, all 3 of you can change my clutch
Re: The PITS at BalaDONT leave your car alone with spanners next to it, you will see your bits regularly whizzing around Bala on other cars
Ste
FOG Administrator Frontera Technical Support Often Imitated Never Bettered http://www.fronteraowners.co.uk ![]() Its here, the FOG Annual Meet 2014 viewforum.php?f=123
Re: The PITS at Balaoiy less of the tractor
![]() The family that is F.O.G
Long Live,Trusty Rusty ![]()
Re: The PITS at BalaIts also a case of what tools are going to be there. To do some of the more fun jobs you need big, heavy and valuable bits of kit. I like to travel light on weekends as theres enough camping kit to go along with recovery kit. If someones got the kit and effort there will be plenty of experience to hand
Fronty no.4, pimp mobile Treg 3.2 LWB lifted 2.5"
Fronty no.5 2.8 swb hd coils +2" 31"machos.
Re: The PITS at BalaI will be taking the emergency tool kit, but I will bring the OP-Com for Diagnostics and fault code removal airbag reset etc
Re: The PITS at Bala![]() Fronty no.4, pimp mobile Treg 3.2 LWB lifted 2.5"
Fronty no.5 2.8 swb hd coils +2" 31"machos.
39 posts
• Page 1 of 2 • 1, 2
Who is onlineUsers browsing this forum: No registered users and 9 guests | ||||||||||