DOH! Stripped Sump Thread.
47 posts
• Page 3 of 3 • 1, 2, 3
Re: DOH! Stripped Sump Thread.sir doris could you give me a link to uk drills on ebay as i have put in the search box on ebay and nothings coming up , thanks
Re: DOH! Stripped Sump Thread.Il go one better. Drillbit and taps are from UK Drills on Ebay, Bolt and washer are from www.stagonset.co.uk I got a stainless steel bolt and washer, a bit more expensive at about £1.80, but a regular galvanised bolt and washer could be had in a hardware store for about 20P.
14mm Drill bit Ebay number: 250301673742 1st and 2nd Tap Ebay number: 260294168553 For the taps buy 2 and when you come to checkout tell them you want a 1st and 2nd. And the 16x2.0 Stainless Steel bolt was from here: M16x2.0x25mm Bolt And I bought a Stainless Steel washer as well: M16 Form A washer
Re: DOH! Stripped Sump Thread.Handy info Phil
Ste
FOG Administrator Frontera Technical Support Often Imitated Never Bettered http://www.fronteraowners.co.uk ![]() Its here, the FOG Annual Meet 2014 viewforum.php?f=123
Re: DOH! Stripped Sump Thread.It is. Fingers crossed it will all fit together and work as advertised
As mentioned in a previous post, check to see if you have a steel or alloy sump as the steel ones have a bit less material to work with then the alloy ones.
Re: DOH! Stripped Sump Thread.For those with the 2.8 this is what your dealing with
![]() inside view ![]() Ste
FOG Administrator Frontera Technical Support Often Imitated Never Bettered http://www.fronteraowners.co.uk ![]() Its here, the FOG Annual Meet 2014 viewforum.php?f=123
Re: DOH! Stripped Sump Thread.As you can all see from Ste's pics the pressed steel sump just has a metal collar welded to the sump and it doesnt have much material to work with.
Goo pic Ste.
Re: DOH! Stripped Sump Thread.mines not lke that , so i must have the alloy sump . thanks for the info sir doris. i will order them now thanks mick
47 posts
• Page 3 of 3 • 1, 2, 3
Who is onlineUsers browsing this forum: No registered users and 11 guests | ||||||