Smoke test

[Mossey]

Just had my 2.8 in for test and wondered if these results were any good or not, can anyone tell me?

1 1.57
2 0.59
3 0.55
4 0.45
average 0.53 1/m
???

[Road Hog]

Any result that ends with a pass is good.........

[john boy]

Yeah they are good the last 3 are realy low

[Mossey]

Does that mean I could get away with turning the fuel pump up some more?
I would also comment that so far I have removed the cat, blanked off the egr, restricted the wastegate and turned the pump up 1/4 turn, oh and fitted a large cone filter so I was a bit worried about the emisions test.

[Drift]

So you got away with no cat

[Red Oktober]

does make interesting reading ........

how did you replace the cat ...was a bolt on affair ...or ...did you weld a piece in

[Mossey]

made my own pipe joined with special joint from exhaust centre.
just been back to test centre and had a chat with the tester, the limit for the 2.8 is 3.0 1/m so could get away with loads more fuel.
Dont think people behind would agree though.

[Red Oktober]

have you noticed any differences sinse removing the cat

[Mossey]

little bit better at the bottom end