Mechanic needed in Birmingham/Evesham area

[Road Hog]

Jase,get a cordless drill with a 10mm twist bit & drill a hole in the bottom of the bell housing,it will give a good indication of the crud content

[colley]

[jason]

[jason]

[jason]

Nope no good clutch is going

[Drift]

Dam

[jason]

On the way to work fine,its 19 miles to work,on the way home 1 mile to go in 4th gear revs at 2ooo and it just started juddering but revs stayed the same I have had a good look and all fine, its just got to be on the way out.
Ow well i am just keep going to it packs up and, do your trick and get towed back by the nice AA man,and then i will think whats going to happen to her

[jason]

Its not the clutch woohoo

Well at dinner time to day i gave her a good wash out, and the yard mechanic, said what are you doing so i told him,he had a look,he said there's nothing wrong with that clutch what so ever he said to get it checked as he dose HGVS.
so on the way home she was running fine till i went over a speed bump and it started again but worse this time,so i pulled over and she not firing right had a pull about nothing changed so i just spluted my way home 35 mph max with people giving me grief

[jason]

OW I spoke to Adam to day going to give me a call back on Monday with price.
But i need to get it to him
So what do you lot think whats wrong then,i think its running on 3 pistons

[Drift]

I wasnt convinced it was the clutch from what you said.
Are any eml lights coming on?

[jason]

Sorry
No no lights , she crises fine till i slow down and go to accelerate then she starts to shake and starts kangarooing

[jason]

He has the same as me
viewtopic.php?f=16&t=34062&p=375306#p375306

[jason]

Well my truck has finally got to me, I cleaned the egr valve, and it still looks newish,and it did not solve the promblem.
I went out in it and it't just the same,so I went down the A46 to give her I good run,and it just packed up,so she is at Eurotow recovery and repair at Worcester now, Mark the mechanic is going to have a look tomorrow,but I don't think its looking good

[jason]

Well after throwing my dummy out,i decided its not going to beat me so i got her back yesterday ,and i am well happy now,all fixed she runs better then ever
His code reader was coming up with no fault,so he got a chap who did a tech 2 dealer tool thingy on it,and he found one of the 24 vales was sticking.
So after a strip down and 5 days later i got her back and only cost £112 to do and i and i am claiming it back as the engine is still under warranty after its part engine rebuild and they agreed it after i had spoke to the manager, as i had it done by another garage.
So happy days

[Drift]

Result

[jason]

Its got to go back in at 500 miles have an engine flush and oil treatment again.
All i got to do now is,get the starter motor redone.