Novice day Jan 30th 2011
Forum rules
Disclaimer:
Please understand that the Frontera Owners Group or any organiser of events will not be held responsible for any loss, damage, accident or injury caused by attending an event. You are responsible for your passengers and for your own safety and should carry the necessary recovery and safety equipment. You agree to follow the rules of the Highway Code, Green Lane Code and club pay and play site rules whichever applies. For greenlane events; All events should adhere to the GLASS Code of Conduct, and please note that Rights Of Way often change and if a TRO (traffic regulation order) has been put in place by the local council you should not drive the lane. If you do not agree to the above you should refrain from taking part in the event.
Disclaimer:
Please understand that the Frontera Owners Group or any organiser of events will not be held responsible for any loss, damage, accident or injury caused by attending an event. You are responsible for your passengers and for your own safety and should carry the necessary recovery and safety equipment. You agree to follow the rules of the Highway Code, Green Lane Code and club pay and play site rules whichever applies. For greenlane events; All events should adhere to the GLASS Code of Conduct, and please note that Rights Of Way often change and if a TRO (traffic regulation order) has been put in place by the local council you should not drive the lane. If you do not agree to the above you should refrain from taking part in the event.
Re: Novice day Jan 30th 2011
by adz4837 on Thu Jan 13, 2011 10:03 pm
What type of distance are we gonna be doing just wanna know how much petrol to put in ??
I DO IT IN STYLE
- adz4837
- Senior Frontera Engineer
- Posts: 153
- Joined: Tue Nov 09, 2010 10:28 pm
- Location: Kidderminster/welshpool
- Model: 2.2 DTI 5dr
- Registration Year: 2001/X
- Vehicle Name: EVE
- Modifications: Trooper HD coils
+2 wind up
silicone vac hose
cig light in boot
X4 spotlights on roof
SS Snorkel - Region: Midlands
Re: Novice day Jan 30th 2011
by jason on Thu Jan 13, 2011 10:49 pm
-
jason - Leper of fronteras
- Posts: 1818
- Joined: Sun Sep 06, 2009 5:41 pm
- Location: Evesham,Worcestershire
- Model: 2.2i 5dr
- Registration Year: 1999/T
- Vehicle Name: Tarzan
- Modifications: I dont believe in mods...... yeh right! check out below link...
http://www.fronteraowners.co.uk/forums/ ... 98#p315298 - Region: Midlands
Re: Novice day Jan 30th 2011
by alex on Sat Jan 15, 2011 2:29 pm
Ok folks, we will be meeting on top of the Longmynd (by Church Stretton).
Follow the portway (road) to the turn off for the glider club and there is a huge lay by where we can meet. Postcode for the glider club is SY6 6TA
Need to agree a start/meet time with G and will post soon.
There we will split the groups and head off on the same route from different start points.
Distance over the day wiill be no more than about 20 miles, when in low box mpg isnt as good, but unless there is an issue with the car fuel usage on the day wont be huge. I always like to start a day with a full tank, but with a 2.8 thats a good range
Any questions let me know.
Follow the portway (road) to the turn off for the glider club and there is a huge lay by where we can meet. Postcode for the glider club is SY6 6TA
Need to agree a start/meet time with G and will post soon.
There we will split the groups and head off on the same route from different start points.
Distance over the day wiill be no more than about 20 miles, when in low box mpg isnt as good, but unless there is an issue with the car fuel usage on the day wont be huge. I always like to start a day with a full tank, but with a 2.8 thats a good range
Any questions let me know.
Fronty no.4, pimp mobile Treg 3.2 LWB lifted 2.5"
Fronty no.5 2.8 swb hd coils +2" 31"machos.
Fronty no.5 2.8 swb hd coils +2" 31"machos.
-
alex - The Battering Ram
- Posts: 4625
- Joined: Wed Mar 14, 2007 4:18 pm
- Model: 3.2 V6 5dr
- Registration Year: 1999/T
- Modifications: 3.2v6 LWB lifted on 31"at's "The Pimp mobile"
2.8 LWB
5" supension lift,
Body lift,
Manual hubs,
33" mudders,
Fixed Flywheel,
B&Q snorkle,
Flipped ball joints,
Procomp steering shocker,
Modified front bump stops,
Exhaust recirc removed,
EGR removed,
Cat removed,
Front diff lowered,
Dislocation cones,
Spring retainers,
Buckets 4 point harness,
The biggest cb twig you can get.
"The Beast" - Region: Midlands
Re: Novice day Jan 30th 2011
by snapper on Sun Jan 16, 2011 11:49 pm
This posting may have been helpfull, on the other hand probably not... Either way, I may have had drink when posting it in which case it's probably not as helpfull as it could have been
Work safe, and remember all technical problems can be resolved with a hammer, the trick is knowing where to hit it and how big a hammer to use (I often find it may also help to have a spare bit in the shed to replace the bit you have just mullered
)
Work in Progress (or not as the case may be) I give you.... 'O-no' the truck.
Comments on 'O-no' the truck may be left here
Work in Progress (or not as the case may be) I give you.... 'Truck'
Comments on 'Truck' the truck may be left here
Owning a 2.8 is a hobby in it's self...
Work safe, and remember all technical problems can be resolved with a hammer, the trick is knowing where to hit it and how big a hammer to use (I often find it may also help to have a spare bit in the shed to replace the bit you have just mullered
)Work in Progress (or not as the case may be) I give you.... 'O-no' the truck.
Comments on 'O-no' the truck may be left here
Work in Progress (or not as the case may be) I give you.... 'Truck'
Comments on 'Truck' the truck may be left here
Owning a 2.8 is a hobby in it's self...
-
snapper - Lord frontera
- Posts: 2189
- Joined: Sat Mar 27, 2010 1:32 am
- Location: Oxfordshire, Brize Norton.
- Model: 2.8 TDI 5dr
- Registration Year: 1995/N
- Vehicle Name: Truck and O-no
- Modifications: -
2.8 TD LWB - Truck:
Side Steps Removed
EGR, Birds Nest & Both Butterfly Valves Removed
Particulate Filter removed and pipe welded in
Safari Snorkel fitted
Trooper Flywheel & Clutch fitted
Trooper LSD Rear Axle fitted
Winch Bumper & Winch fitted
3.1 Engine Fitted
2" Suspension Lift
2.8 TD LWB - O-no:
Standard, for now.
2.5 Volvo 850 Saloon:
Standard
Volvo XC70 D5 SE Lux (185bhp)
Standard - Region: South East
Re: Novice day Jan 30th 2011
by snapper on Mon Jan 17, 2011 12:14 am
Alex
Do you have a grid or lat/long (google earth link maybe?) for the layby please.
Cheers.
Do you have a grid or lat/long (google earth link maybe?) for the layby please.
Cheers.
This posting may have been helpfull, on the other hand probably not... Either way, I may have had drink when posting it in which case it's probably not as helpfull as it could have been
Work safe, and remember all technical problems can be resolved with a hammer, the trick is knowing where to hit it and how big a hammer to use (I often find it may also help to have a spare bit in the shed to replace the bit you have just mullered )
Work in Progress (or not as the case may be) I give you.... 'O-no' the truck.
Comments on 'O-no' the truck may be left here
Work in Progress (or not as the case may be) I give you.... 'Truck'
Comments on 'Truck' the truck may be left here
Owning a 2.8 is a hobby in it's self...
Work safe, and remember all technical problems can be resolved with a hammer, the trick is knowing where to hit it and how big a hammer to use (I often find it may also help to have a spare bit in the shed to replace the bit you have just mullered
)Work in Progress (or not as the case may be) I give you.... 'O-no' the truck.
Comments on 'O-no' the truck may be left here
Work in Progress (or not as the case may be) I give you.... 'Truck'
Comments on 'Truck' the truck may be left here
Owning a 2.8 is a hobby in it's self...
-
snapper - Lord frontera
- Posts: 2189
- Joined: Sat Mar 27, 2010 1:32 am
- Location: Oxfordshire, Brize Norton.
- Model: 2.8 TDI 5dr
- Registration Year: 1995/N
- Vehicle Name: Truck and O-no
- Modifications: -
2.8 TD LWB - Truck:
Side Steps Removed
EGR, Birds Nest & Both Butterfly Valves Removed
Particulate Filter removed and pipe welded in
Safari Snorkel fitted
Trooper Flywheel & Clutch fitted
Trooper LSD Rear Axle fitted
Winch Bumper & Winch fitted
3.1 Engine Fitted
2" Suspension Lift
2.8 TD LWB - O-no:
Standard, for now.
2.5 Volvo 850 Saloon:
Standard
Volvo XC70 D5 SE Lux (185bhp)
Standard - Region: South East
Re: Novice day Jan 30th 2011
by MrTom on Tue Jan 18, 2011 1:19 pm
Hi guys............. 
I can't go. I was due to move on the 29th (me and the missus moving in together
) but the b*****d letting agents have agreed with the landlord that the bloke moving out can use all of the 29th to move out if he needs too.
I am gutted as I have been looking forward to this since the list went up.
List update:
1) swini
2) red5
3) SnortonR
4) adz4837
5) snapper
6)
reserve
1)
2)
I can't go. I was due to move on the 29th (me and the missus moving in together
) but the b*****d letting agents have agreed with the landlord that the bloke moving out can use all of the 29th to move out if he needs too. I am gutted as I have been looking forward to this since the list went up.
List update:
1) swini
2) red5
3) SnortonR
4) adz4837
5) snapper
6)
reserve
1)
2)
-----------MUD SLUT ~ hitting every hole ~----------
-
MrTom - Lord frontera
- Posts: 1116
- Joined: Tue Oct 05, 2010 2:05 am
- Location: Studley (Just off J3 off M42)
- Model: 2.0i Sport Niagra 3dr
- Registration Year: 1998/R
- Vehicle Name: Felix
- Modifications: -
Snorkel
K&N Filter
Tinted windows
Under sealed
Console mounted multi point charger
CB Radio
16" Modular rims
Insa Turbo special tracks
2" suspension Lift
Spare wheel carrier removed
Rough country Shocks
Roof Rack
4 X 55 Watt roof lights
Tow Bar
Recovery points (front and rear)
Fan over ride switch
Hi-lift Jack Mounted on rear door
Bucket seats
3-point Sparco Harnesses
Rear seats removed
Manual locking Hubs
Rear welded recovery point
Winch bumper
Winch - Region: Midlands
Re: Novice day Jan 30th 2011
by alex on Tue Jan 18, 2011 8:23 pm
Ok I got grid reference from memmory map of SO 40468 91860 for the lay by.
http://maps.google.co.uk/maps?client=fi ... ,0.944,0,0
http://maps.google.co.uk/maps?client=fi ... ,0.944,0,0
Fronty no.4, pimp mobile Treg 3.2 LWB lifted 2.5"
Fronty no.5 2.8 swb hd coils +2" 31"machos.
Fronty no.5 2.8 swb hd coils +2" 31"machos.
-
alex - The Battering Ram
- Posts: 4625
- Joined: Wed Mar 14, 2007 4:18 pm
- Model: 3.2 V6 5dr
- Registration Year: 1999/T
- Modifications: 3.2v6 LWB lifted on 31"at's "The Pimp mobile"
2.8 LWB
5" supension lift,
Body lift,
Manual hubs,
33" mudders,
Fixed Flywheel,
B&Q snorkle,
Flipped ball joints,
Procomp steering shocker,
Modified front bump stops,
Exhaust recirc removed,
EGR removed,
Cat removed,
Front diff lowered,
Dislocation cones,
Spring retainers,
Buckets 4 point harness,
The biggest cb twig you can get.
"The Beast" - Region: Midlands
Re: Novice day Jan 30th 2011
by snapper on Tue Jan 18, 2011 9:39 pm
This posting may have been helpfull, on the other hand probably not... Either way, I may have had drink when posting it in which case it's probably not as helpfull as it could have been
Work safe, and remember all technical problems can be resolved with a hammer, the trick is knowing where to hit it and how big a hammer to use (I often find it may also help to have a spare bit in the shed to replace the bit you have just mullered )
Work in Progress (or not as the case may be) I give you.... 'O-no' the truck.
Comments on 'O-no' the truck may be left here
Work in Progress (or not as the case may be) I give you.... 'Truck'
Comments on 'Truck' the truck may be left here
Owning a 2.8 is a hobby in it's self...
Work safe, and remember all technical problems can be resolved with a hammer, the trick is knowing where to hit it and how big a hammer to use (I often find it may also help to have a spare bit in the shed to replace the bit you have just mullered
)Work in Progress (or not as the case may be) I give you.... 'O-no' the truck.
Comments on 'O-no' the truck may be left here
Work in Progress (or not as the case may be) I give you.... 'Truck'
Comments on 'Truck' the truck may be left here
Owning a 2.8 is a hobby in it's self...
-
snapper - Lord frontera
- Posts: 2189
- Joined: Sat Mar 27, 2010 1:32 am
- Location: Oxfordshire, Brize Norton.
- Model: 2.8 TDI 5dr
- Registration Year: 1995/N
- Vehicle Name: Truck and O-no
- Modifications: -
2.8 TD LWB - Truck:
Side Steps Removed
EGR, Birds Nest & Both Butterfly Valves Removed
Particulate Filter removed and pipe welded in
Safari Snorkel fitted
Trooper Flywheel & Clutch fitted
Trooper LSD Rear Axle fitted
Winch Bumper & Winch fitted
3.1 Engine Fitted
2" Suspension Lift
2.8 TD LWB - O-no:
Standard, for now.
2.5 Volvo 850 Saloon:
Standard
Volvo XC70 D5 SE Lux (185bhp)
Standard - Region: South East
Re: Novice day Jan 30th 2011
by snapper on Sat Jan 22, 2011 7:21 pm
Do we have a ETA yet? If not hows about a bracing 06:00 
This posting may have been helpfull, on the other hand probably not... Either way, I may have had drink when posting it in which case it's probably not as helpfull as it could have been
Work safe, and remember all technical problems can be resolved with a hammer, the trick is knowing where to hit it and how big a hammer to use (I often find it may also help to have a spare bit in the shed to replace the bit you have just mullered )
Work in Progress (or not as the case may be) I give you.... 'O-no' the truck.
Comments on 'O-no' the truck may be left here
Work in Progress (or not as the case may be) I give you.... 'Truck'
Comments on 'Truck' the truck may be left here
Owning a 2.8 is a hobby in it's self...
Work safe, and remember all technical problems can be resolved with a hammer, the trick is knowing where to hit it and how big a hammer to use (I often find it may also help to have a spare bit in the shed to replace the bit you have just mullered
)Work in Progress (or not as the case may be) I give you.... 'O-no' the truck.
Comments on 'O-no' the truck may be left here
Work in Progress (or not as the case may be) I give you.... 'Truck'
Comments on 'Truck' the truck may be left here
Owning a 2.8 is a hobby in it's self...
-
snapper - Lord frontera
- Posts: 2189
- Joined: Sat Mar 27, 2010 1:32 am
- Location: Oxfordshire, Brize Norton.
- Model: 2.8 TDI 5dr
- Registration Year: 1995/N
- Vehicle Name: Truck and O-no
- Modifications: -
2.8 TD LWB - Truck:
Side Steps Removed
EGR, Birds Nest & Both Butterfly Valves Removed
Particulate Filter removed and pipe welded in
Safari Snorkel fitted
Trooper Flywheel & Clutch fitted
Trooper LSD Rear Axle fitted
Winch Bumper & Winch fitted
3.1 Engine Fitted
2" Suspension Lift
2.8 TD LWB - O-no:
Standard, for now.
2.5 Volvo 850 Saloon:
Standard
Volvo XC70 D5 SE Lux (185bhp)
Standard - Region: South East
Re: Novice day Jan 30th 2011
by alex on Sat Jan 22, 2011 9:20 pm
06:60Even fuddy gives us more time in bed.
Hows about 9am, me and Graeme will meet on the M54 services Telford 8:30, should make it up the mynd by 9.
Fronty no.4, pimp mobile Treg 3.2 LWB lifted 2.5"
Fronty no.5 2.8 swb hd coils +2" 31"machos.
Fronty no.5 2.8 swb hd coils +2" 31"machos.
-
alex - The Battering Ram
- Posts: 4625
- Joined: Wed Mar 14, 2007 4:18 pm
- Model: 3.2 V6 5dr
- Registration Year: 1999/T
- Modifications: 3.2v6 LWB lifted on 31"at's "The Pimp mobile"
2.8 LWB
5" supension lift,
Body lift,
Manual hubs,
33" mudders,
Fixed Flywheel,
B&Q snorkle,
Flipped ball joints,
Procomp steering shocker,
Modified front bump stops,
Exhaust recirc removed,
EGR removed,
Cat removed,
Front diff lowered,
Dislocation cones,
Spring retainers,
Buckets 4 point harness,
The biggest cb twig you can get.
"The Beast" - Region: Midlands
Re: Novice day Jan 30th 2011
by snapper on Sat Jan 22, 2011 10:06 pm
09:00? Sounds good, leave at 7 then and hope for a clear road.
This posting may have been helpfull, on the other hand probably not... Either way, I may have had drink when posting it in which case it's probably not as helpfull as it could have been
Work safe, and remember all technical problems can be resolved with a hammer, the trick is knowing where to hit it and how big a hammer to use (I often find it may also help to have a spare bit in the shed to replace the bit you have just mullered )
Work in Progress (or not as the case may be) I give you.... 'O-no' the truck.
Comments on 'O-no' the truck may be left here
Work in Progress (or not as the case may be) I give you.... 'Truck'
Comments on 'Truck' the truck may be left here
Owning a 2.8 is a hobby in it's self...
Work safe, and remember all technical problems can be resolved with a hammer, the trick is knowing where to hit it and how big a hammer to use (I often find it may also help to have a spare bit in the shed to replace the bit you have just mullered
)Work in Progress (or not as the case may be) I give you.... 'O-no' the truck.
Comments on 'O-no' the truck may be left here
Work in Progress (or not as the case may be) I give you.... 'Truck'
Comments on 'Truck' the truck may be left here
Owning a 2.8 is a hobby in it's self...
-
snapper - Lord frontera
- Posts: 2189
- Joined: Sat Mar 27, 2010 1:32 am
- Location: Oxfordshire, Brize Norton.
- Model: 2.8 TDI 5dr
- Registration Year: 1995/N
- Vehicle Name: Truck and O-no
- Modifications: -
2.8 TD LWB - Truck:
Side Steps Removed
EGR, Birds Nest & Both Butterfly Valves Removed
Particulate Filter removed and pipe welded in
Safari Snorkel fitted
Trooper Flywheel & Clutch fitted
Trooper LSD Rear Axle fitted
Winch Bumper & Winch fitted
3.1 Engine Fitted
2" Suspension Lift
2.8 TD LWB - O-no:
Standard, for now.
2.5 Volvo 850 Saloon:
Standard
Volvo XC70 D5 SE Lux (185bhp)
Standard - Region: South East
Re: Novice day Jan 30th 2011
by Postfinder on Sat Jan 22, 2011 11:51 pm
-
Postfinder - Move the tree Postfinder is here
- Posts: 743
- Joined: Tue May 29, 2007 9:04 pm
- Location: Dudley, West Midlands
- Modifications: The biggest hazard to my truck is Me.
"there is nothing wrong with getting a Sport airborne, bad things only happen when you land"!!
Re: Novice day Jan/Feb 2011
by SnortonR on Sun Jan 23, 2011 10:21 am
- SnortonR
- Senior Frontera Engineer
- Posts: 191
- Joined: Wed Aug 19, 2009 9:46 am
- Location: Llanelwedd
- Model: 2.2 DTI 5dr
- Registration Year: 2004/04
- Region: Mid Wales
Re: Novice day Jan 30th 2011
by swini on Wed Jan 26, 2011 9:39 pm
Would it be a good idea to exchange mobiles
- swini
- Apprentice Frontera engineer
- Posts: 83
- Joined: Sun Dec 19, 2010 12:26 pm
- Region: South East
Re: Novice day Jan/Feb 2011
by Postfinder on Wed Jan 26, 2011 11:23 pm
-
Postfinder - Move the tree Postfinder is here
- Posts: 743
- Joined: Tue May 29, 2007 9:04 pm
- Location: Dudley, West Midlands
- Modifications: The biggest hazard to my truck is Me.
"there is nothing wrong with getting a Sport airborne, bad things only happen when you land"!!
Re: Novice day Jan 30th 2011
by snapper on Wed Jan 26, 2011 11:35 pm
This posting may have been helpfull, on the other hand probably not... Either way, I may have had drink when posting it in which case it's probably not as helpfull as it could have been
Work safe, and remember all technical problems can be resolved with a hammer, the trick is knowing where to hit it and how big a hammer to use (I often find it may also help to have a spare bit in the shed to replace the bit you have just mullered )
Work in Progress (or not as the case may be) I give you.... 'O-no' the truck.
Comments on 'O-no' the truck may be left here
Work in Progress (or not as the case may be) I give you.... 'Truck'
Comments on 'Truck' the truck may be left here
Owning a 2.8 is a hobby in it's self...
Work safe, and remember all technical problems can be resolved with a hammer, the trick is knowing where to hit it and how big a hammer to use (I often find it may also help to have a spare bit in the shed to replace the bit you have just mullered
)Work in Progress (or not as the case may be) I give you.... 'O-no' the truck.
Comments on 'O-no' the truck may be left here
Work in Progress (or not as the case may be) I give you.... 'Truck'
Comments on 'Truck' the truck may be left here
Owning a 2.8 is a hobby in it's self...
-
snapper - Lord frontera
- Posts: 2189
- Joined: Sat Mar 27, 2010 1:32 am
- Location: Oxfordshire, Brize Norton.
- Model: 2.8 TDI 5dr
- Registration Year: 1995/N
- Vehicle Name: Truck and O-no
- Modifications: -
2.8 TD LWB - Truck:
Side Steps Removed
EGR, Birds Nest & Both Butterfly Valves Removed
Particulate Filter removed and pipe welded in
Safari Snorkel fitted
Trooper Flywheel & Clutch fitted
Trooper LSD Rear Axle fitted
Winch Bumper & Winch fitted
3.1 Engine Fitted
2" Suspension Lift
2.8 TD LWB - O-no:
Standard, for now.
2.5 Volvo 850 Saloon:
Standard
Volvo XC70 D5 SE Lux (185bhp)
Standard - Region: South East
Re: Novice day Jan 30th 2011
by Hound Dog on Wed Jan 26, 2011 11:36 pm
-
Hound Dog - Missing In Action
- Posts: 1277
- Joined: Thu Jun 07, 2007 11:06 pm
- Location: Hampshire
- Model: 2.8 TDI 5dr
- Registration Year: 1995/N
- Vehicle Name: Tractor
- Modifications: 2" suspension lift EGR and birds nest removed.
- Region: Southern England
Re: Novice day Jan/Feb 2011
by SnortonR on Thu Jan 27, 2011 5:31 pm
Vehicle update. I haven't started on the fronty yet (head gasket) and the troop's up for sale so I don't want to risk an accident. That leaves me with a 2.7d swb maverick.Is that suitable/ok?[/quote]
Sorry, dont know the ride hight of a maverick, but a standard frontera with road tyres can get around without many, or any issues.
Trucks with CB radio's will be at the front and rear, so help will quickly be at hand for anyone encountering a problem.
G.[/quote]
The ground clearance is only 2mm less, but I'm feeling that I haven't had it long (couple of hundred miles) and due to the weather haven't had much chance to check it over - it drives ok on the road but it may be more responsible not to take it where bits might drop off or fail until I've crawled underneath it. Forgive me for pulling out at this late stage and please let me know of any future beginners days. Taking a ford on a foggers do though
Sorry, dont know the ride hight of a maverick, but a standard frontera with road tyres can get around without many, or any issues.
Trucks with CB radio's will be at the front and rear, so help will quickly be at hand for anyone encountering a problem.
G.[/quote]
The ground clearance is only 2mm less, but I'm feeling that I haven't had it long (couple of hundred miles) and due to the weather haven't had much chance to check it over - it drives ok on the road but it may be more responsible not to take it where bits might drop off or fail until I've crawled underneath it. Forgive me for pulling out at this late stage and please let me know of any future beginners days. Taking a ford on a foggers do though
- SnortonR
- Senior Frontera Engineer
- Posts: 191
- Joined: Wed Aug 19, 2009 9:46 am
- Location: Llanelwedd
- Model: 2.2 DTI 5dr
- Registration Year: 2004/04
- Region: Mid Wales
Re: Novice day Jan 30th 2011
by alex on Thu Jan 27, 2011 8:45 pm
Bring it on, we arent doing anything critical on ground clearance. Did all these lanes twice in my SWB when it had no 4x4 and only needed one tug.
Will pm my number as we dont post open forum.
CB adds to the day, can natter while we drive and give bits of advice too.
Will pm my number as we dont post open forum.
CB adds to the day, can natter while we drive and give bits of advice too.
Fronty no.4, pimp mobile Treg 3.2 LWB lifted 2.5"
Fronty no.5 2.8 swb hd coils +2" 31"machos.
Fronty no.5 2.8 swb hd coils +2" 31"machos.
-
alex - The Battering Ram
- Posts: 4625
- Joined: Wed Mar 14, 2007 4:18 pm
- Model: 3.2 V6 5dr
- Registration Year: 1999/T
- Modifications: 3.2v6 LWB lifted on 31"at's "The Pimp mobile"
2.8 LWB
5" supension lift,
Body lift,
Manual hubs,
33" mudders,
Fixed Flywheel,
B&Q snorkle,
Flipped ball joints,
Procomp steering shocker,
Modified front bump stops,
Exhaust recirc removed,
EGR removed,
Cat removed,
Front diff lowered,
Dislocation cones,
Spring retainers,
Buckets 4 point harness,
The biggest cb twig you can get.
"The Beast" - Region: Midlands
Re: Novice day Jan 30th 2011
by SnortonR on Thu Jan 27, 2011 9:38 pm
- SnortonR
- Senior Frontera Engineer
- Posts: 191
- Joined: Wed Aug 19, 2009 9:46 am
- Location: Llanelwedd
- Model: 2.2 DTI 5dr
- Registration Year: 2004/04
- Region: Mid Wales
Who is online
Users browsing this forum: No registered users and 41 guests