//
Midlands 2010 Christmas meet??
Forum rules
Disclaimer: Please understand that the Frontera Owners Group or any organiser of events will not be held responsible for any loss, damage, accident or injury caused by attending an event. You are responsible for your passengers and for your own safety and should carry the necessary recovery and safety equipment. You agree to follow the rules of the Highway Code, Green Lane Code and club pay and play site rules whichever applies. For greenlane events; All events should adhere to the GLASS Code of Conduct, and please note that Rights Of Way often change and if a TRO (traffic regulation order) has been put in place by the local council you should not drive the lane. If you do not agree to the above you should refrain from taking part in the event.
96 posts
• Page 5 of 5 • 1, 2, 3, 4, 5
Re: Midlands 2010 Christmas meet??Awwwwww Rob, what a bummer
Ste
FOG Administrator Frontera Technical Support Often Imitated Never Bettered http://www.fronteraowners.co.uk Its here, the FOG Annual Meet 2014 viewforum.php?f=123
Re: Midlands 2010 Christmas meet??erm, change the dates
flying solo, weeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
Re: Midlands 2010 Christmas meet??
I have no probs with that, how is everyone else fixed ? Cheers Roo
Re: Midlands 2010 Christmas meet??
Reasonably flexible, although anything in Jan is out for me. This posting may have been helpfull, on the other hand probably not... Either way, I may have had drink when posting it in which case it's probably not as helpfull as it could have been
Work safe, and remember all technical problems can be resolved with a hammer, the trick is knowing where to hit it and how big a hammer to use (I often find it may also help to have a spare bit in the shed to replace the bit you have just mullered ) Work in Progress (or not as the case may be) I give you.... 'O-no' the truck. Comments on 'O-no' the truck may be left here Work in Progress (or not as the case may be) I give you.... 'Truck' Comments on 'Truck' the truck may be left here Owning a 2.8 is a hobby in it's self...
Re: Midlands 2010 Christmas meet??You dont have tochange the date on my account people, but it would be nice to see everyone.
Comments on Betsy here please!!! viewtopic.php?f=115&t=56282
Bobster!!!! Frontera's do it better in MUD!!! West Midlands Area Rep Its here, the FOG Annual Meet 2014 viewforum.php?f=123
Re: Midlands 2010 Christmas meet??Suits me, a Saturday would be nice though...thinking of the hangover
Ste
FOG Administrator Frontera Technical Support Often Imitated Never Bettered http://www.fronteraowners.co.uk Its here, the FOG Annual Meet 2014 viewforum.php?f=123
Re: Midlands 2010 Christmas meet??We don't mind if the date changes.
To be honest, if it was later, that would be better, as we are moving house next weekend. Could still do the 6th though, but would be good to catch up with Bobby and Chrissy. For what it's worth it was worth all the while
It's something unpredictable but in the end is right I hope you have the time of your life Green Day - Good Riddence (Time of your life)
Re: Midlands 2010 Christmas meet??
A Saturday be good and not for the hangover either As I'll be in the driving seat Looking forward to it whenever it is Cheers Roo
Re: Midlands 2010 Christmas meet??Hi
Any dates set yet please? Cheers Roo
Re: Midlands 2010 Christmas meet??like roo said any date yet?
need to look at re booking our baby sitter.
Re: Midlands 2010 Christmas meet??As things are I may not be able to make it with only 12 weeks to the annual meet and me needing to finance and fit a gearbox and Lee's car needing and MOT and other commitments plus I still need a job, things are a bit tight so I will have to miss this one now
Ste
FOG Administrator Frontera Technical Support Often Imitated Never Bettered http://www.fronteraowners.co.uk Its here, the FOG Annual Meet 2014 viewforum.php?f=123
Re: Midlands 2010 Christmas meet??
Hi Ste That is a real shame, was looking forward in seeing yourself and Lee again.. Take care and Good luck to ya.. See you at the annual meet Cheers Roo
Re: Midlands 2010 Christmas meet??
Look what I found, it's not the cleanest gearbox on the planet and has been out of a car for at least 12 months but it seems tight enough and was sold to me as a 2.8 gearbox some time ago when I was looking for a spare. The one fitted to my truck has a fairly sloppy gate (when compared to the MX5 sat in the drive next to it) so I went looking for another gearbox, it appears the 'fix' for sloppy gearbox gates is a bit of moulded nylon that you can get from vx for pence few. I will get round to it one day....... Meantime Drifty, if you want the gearbox it's your's. But it's sat on my drive underneath the MG atm so transport from Carterton, Oxfordshire up North is required for 1 x ever so slightly heavy gearbox. This posting may have been helpfull, on the other hand probably not... Either way, I may have had drink when posting it in which case it's probably not as helpfull as it could have been
Work safe, and remember all technical problems can be resolved with a hammer, the trick is knowing where to hit it and how big a hammer to use (I often find it may also help to have a spare bit in the shed to replace the bit you have just mullered ) Work in Progress (or not as the case may be) I give you.... 'O-no' the truck. Comments on 'O-no' the truck may be left here Work in Progress (or not as the case may be) I give you.... 'Truck' Comments on 'Truck' the truck may be left here Owning a 2.8 is a hobby in it's self...
Re: Midlands 2010 Christmas meet??Thanks very much Snapper, just spotted this after your pm, sorry.
I have arranged for another gearbox but thank you again for the offer Ste
FOG Administrator Frontera Technical Support Often Imitated Never Bettered http://www.fronteraowners.co.uk Its here, the FOG Annual Meet 2014 viewforum.php?f=123
Re: Midlands 2010 Christmas meet??np Drifty, I'll hang on to it as a spare. The wife can drag it down the shed in the morning, give her summit to do.
This posting may have been helpfull, on the other hand probably not... Either way, I may have had drink when posting it in which case it's probably not as helpfull as it could have been
Work safe, and remember all technical problems can be resolved with a hammer, the trick is knowing where to hit it and how big a hammer to use (I often find it may also help to have a spare bit in the shed to replace the bit you have just mullered ) Work in Progress (or not as the case may be) I give you.... 'O-no' the truck. Comments on 'O-no' the truck may be left here Work in Progress (or not as the case may be) I give you.... 'Truck' Comments on 'Truck' the truck may be left here Owning a 2.8 is a hobby in it's self...
Re: Midlands 2010 Christmas meet??Do we have a firm date yet? cos if we don't get a shift on it's gonna be Christmas ........................ again
This posting may have been helpfull, on the other hand probably not... Either way, I may have had drink when posting it in which case it's probably not as helpfull as it could have been
Work safe, and remember all technical problems can be resolved with a hammer, the trick is knowing where to hit it and how big a hammer to use (I often find it may also help to have a spare bit in the shed to replace the bit you have just mullered ) Work in Progress (or not as the case may be) I give you.... 'O-no' the truck. Comments on 'O-no' the truck may be left here Work in Progress (or not as the case may be) I give you.... 'Truck' Comments on 'Truck' the truck may be left here Owning a 2.8 is a hobby in it's self...
96 posts
• Page 5 of 5 • 1, 2, 3, 4, 5
Who is onlineUsers browsing this forum: No registered users and 4 guests | ||||||||||||