Could you make my post as a how to do please.
Are you like me fed up of getting underneath your Frontera to do an oil change, here is a very easy way to do that.

Step 1,buy a 12v oil and diesel transfer pump, I got mine from MachineMart cost £29.99.

Step 2,Insert the inlet tube into the dipstick tube until it won't go any further.

Step 3,Place the pump somewhere so that it doesn't slide off.

Step 4,Insert the outlet hose into a suitable container and connect the power cables to your battery then switch the pump on.
[URL=http://s1235.photobucket.com/user/dave19664/media/FRONTERA%20DTI%20NEW%20PARTS/IMG_20150617_151218_zpsrpolytvb.jpg.html]

As you can see this was the only container I had but it worked and as you can, your able to see the dirty oil.
You can also use this pump to put fresh oil into your engine and its just a reversal or taking old oily out of your engine.
Hope this helps.
Many thanks.
Dave.






