Halfrauds nuts n bolts? Good enough to chuck at the cat on the veg patch but for anything remotely more serious, personally I wouldn’t touch em.
Source the nuts n bolts yourself from the scrappies, spanner in hand, that way they will fit and in 99% of the case will be of the right tensile strength. Failing that a proper fixings supplier or engineering supplier that doesn’t look at you like you have two heads and are talking in riddles when asked about tensile strength, thread pitch and if drilling/tapping the hole the size of drill required for the tap, like the 'expert' did at my local halfrauds once!
Last edited by
snapper on Sun Nov 20, 2011 9:00 pm, edited 1 time in total.
This posting may have been helpfull, on the other hand probably not... Either way, I may have had drink when posting it in which case it's probably not as helpfull as it could have been
Work safe, and remember all technical problems can be resolved with a hammer, the trick is knowing where to hit it and how big a hammer to use (I often find it may also help to have a spare bit in the shed to replace the bit you have just mullered
)
Work in Progress (or not as the case may be) I give you....
'O-no' the truck.Comments on 'O-no' the truck may be left
hereWork in Progress (or not as the case may be) I give you....
'Truck'Comments on 'Truck' the truck may be left
hereOwning a 2.8 is a hobby in it's self...
