which ones which

The photo is of the bank of five vac pipes that are on the near side inner wing and that lead up to the solinoid unit in the corner of the upper wing/ bulk head the reason for my asking is that 1 and 3 are quite loose i.e. they easerly slide on and off so obviously I have loss of vacum pressure here :oh yer:

but does anybody know where they go ??

Howard

OK There is a photo but I keep getting a message that the quota has been reached so lets just use our imaginations :lol:

At almost the speed of light.........TaDaa....This is what I did last night .....................

Sorry but not the top ones but the bottom ones after they have passed the 4WD solinoids following the bulk head going from flexi pipe to metal pipe then back to flexi before they meet up with this bank of five metal pipes that dissapear off

Howard

Ahhh I need to find a different piccy,bear with me a while :wink:

If you have enough to play with, try cutting the ends back a bit to find a better piece of pipe. May help.

Under the car you have,

The 4WD vacuam reservoir on front crossmember........

Actuator valve on front axle.........

On chassis adjacent to bell housing..............

Note:The two remaining black pipes are front axle breathers NOT vacuam pipes :wink:

On the bulkhead.........

Hi A friend Thanks very much for the photos just out of intrest where did you get your vac pipe from as my local Auto parts only has the good old black braided pipe and to be honest I like that fact that on yours you can see which are vac and which are breathers

Kind regards
Howard

Hi Howard, it is 3mm silicone vacuam hose from Ebay ,it is available in red,blue or black.........See here for details

Thanks for the link just bought filter kit and some vac hose its a good idea that you have so you can see where they all bugger off too, once again thanks for the photos they are a real big help
Howard