Anyone know where EDC is on 2.5 TD?

are you on about the ECU (Engine Control Unit)

i'm possitive i read somewhere on here that it's uder the passenger side carpet at the front...

It's referenced in the Haynes manual as the EDC - Electronic Diesel Control Unit - so I guess the function of the ECU would be the same?! I note that there are a few relays to the LHS of the passenger footwell behind the plastic cover. Can't see anything with the number of connections that the EDC/ECU would have down there.

Why on earth do the Heater Fan Motor relay control 12V/0V come from this unit? Logic escapes me.

Anyhow thks for feedback - I'll go hunting for it this weekend..JB

it's actually under the carpet ........

there is a pic on here somewhere ... :wink:

think it was Paul Higgi who found his under the carpet ....

could you confirm this Paul ....please

Ah jj. Good reply. Just seems overly complicated when it could have simply come from the switched side of the ignition switch.

Had a nose under the carpet on the passenger side, couldn't see any ECU gubbins with a torch tonight!!!

Is it in a cut out in the floor? Being a bloke, if it doesn't jump out at me and shout I don't see it! :wink:

JB

ye its a plate where the floor tows up under the dash,2 screws :wink:

Isn't it great how much progress you can make gioven a warmish dry bright day.

Persisted in hunt for ECU and as advised there the shiny little bugger was hiding in the foot well.

All checked and put back together - problem isolated to circuit supplying the Air Con which is a spur off the supply the the fan. So I've pulled a 20A fuse in the cabin and relay K80 RHS footwell , green 4 pin.

Fan works fine now. Will save investigation on AC wiring for longer daylight hours.

Thanks for all your assistance on this.

I took some pics that I can upload if someone can post instructions or I can email them to a moderator?

Ta. JB.