WHAT YOU DID TO YOUR TRUCK TODAY!

just going out to buy new tools as shed got done a few weeks back

on the list is compleate

AF,MM socket set 1/2 +1/4 drive 1/2 drive sockets up to 32MM

AF & MM spanner sets
combo spanner set
ring spanner set
open end

screwdriver sets

electric testing stuff

hammers

might even get new air tools as they left me comppressor

plus tool box's to keep them in

Fitted High Level Brake Light under the Beacon

Both Beacon and Brake Light are on quick connectors so I can remove the rear bar and refit a normal roof bar

Mine had a ride on the back of a flat bedlorry this morning, to the garage. :cry:

Need it real soon now and family getting fed up of not been able to go out together.
So because i've been messed about and stung on things i'm going to have to get the garage to look at it.

I tweaked me fuel pump and now have abeast back :twisted:

viewtopic.php?f=32&t=26216

need to start fiddling with all the bits to remove what do i need to buy to blank parts off etc

Nowt really, just nuts n bolts. We can fab up the plates at my place.

Drove back from Lincoln and finally fitted manual hubs and real billet spacers! :dance:

Finally Im one of the boys proper ;-)

Ta very much A friend for Tea and allen keys, grease, breaker bars and your spring putting back in genius ;-)

Not a problem Bud,pleasure to see you as always

it got me away from the weeding for a short while :dance:

just been out and fitted roofbars and jigged a roofrack to fit so i can get fishing gear and more than one other person in

Fitted the rest of my vacuam pipes :dance:

back to the weeding

Finished puting front hub carrier back on car,new upper & lower ball joints,new discs & pads (again),readjusted torsion bar.

well it has happened to day "OJ" got her 2" lift and a set of new 265x70x16 ATs,
thanks to my son Nigel = "tazman" :party:

Finally fitted the middle section exhaust :dance:

,I found a place that does cheap exhausts a place called "catman"not sure if anyone has used them before but the middle section from Kwikfit or Formula 1 was about 150 quid from Catman 68 quid plus 12 quid delivery, took off side repeater indicators or what was left of them (bloody kids and footballs) :twisted:

Now the old girl is ready for the mot on Saturday if I get time...
ttfn Dazza.

Took my flaming starter motor off.............again :evil:

Gave up on the damn things and ordered a new one off the bay of E, Just my luck that one will be FUBAR'd too :evil:

Cheers
Dan

dan you have pm :wink:

All I did to mine today was crumple the rear left panel behind the wheel :cry:

Driving down a slippy muddy slope with a trailer load of stone on the back, the weight pushed the back round and even though I floored it to try to straighten it up the trailer pushed the side in abit.

Off to the lockup to finish fitting the snorkel and might fit a new CB. New shocks due Tuesday/Wednesday so I must finish the welding. MOT next Thursday.

Just a quickie....how many seats are required for the MOT. I only have a drivers fitted, do I have to fit the other front one?

I..... well them, A friend,Alex, Sir Doris and Weave67 attacked my car :shock:

A big thanks to you all and Bernie the magician with the nuts and welding

It was de-catted (particulate filter) tube welded in, EGR's completely removed rather than blocked as they where and a few pipes removed, new fuel filter, brake bias valve raised and 1" coil spacers added to my +2" coils, I think thats it.

A big thanks to the guys, it turned out to be a great mini meet with lots banter and laughs.

Oh and I got a new 13 month MOT :dance:

Sorry I missed it guys, not feeling to good today after yesterdays Amputation !!!! :sick:

Found a new game....

Drifty baiting, ah I could play that one all day :dance:

Sorry to hear of you irritation Jase, had a moments silence for you, then we fell about ofr some reason....