WHAT YOU DID TO YOUR TRUCK TODAY!

That just looks like a heat shield, bent at the bottom (sit on top of the block) and another formed dent on the top edge that quite possibly lines up with some pokey out bit on the head, and they have stuck the four individual exhaust manifold gaskets to it as an aid to getting the things easily lined up during re-assembly.

Don't forget to replace all the studs when putting it back together along with the nuts.

I have a Milners one on mine. I cut a notch in that flange to give me room to get spanners onto the manifold bolts. Never had an issue. Though I noticed I have a missing bolt (bottom right) Those ones always fall out.

Stripped off all calipers, unsiezed 2 of them, and replaced with new pads all round.. Still sitting on axles stands deciding what set of wheels and tyres to buy for it....

"" BIG ONES""" :thumbup:

Definetely, looking at 32" or maybe 33" s...

:drink:

just got robbed by the goverement again said £118.35 on letter was £121 on website

Vehicle Make: VAUXHALL
You have selected a tax disc for:
6 months at a duty of: £121.00

but at least it is done for another 6 months

I took mine round the post office on the 2nd of the month and the lady gave me it for £118, it changed on the 1St April but they didn't change it on there web site!! Ha!Ha! so I robbed them for a change!

Just ordered a set of Nitro 8000 shocks from Llama 4x4 and a set of Insa turbo Sahara tyres to fit on my LWB to go along with the new springs.
Need to get it sorted before the end of May so I can tax it instead of the shorty for the summer.

Just started on the paint work on the tailgate, removing scratches and chips, and found a crack, will have to opening it up slightly later and fill it

Had to get a tyre fitted to the front passenger side today. :thumbup:

Went and did this with Mr Tom before washing her

http://s663.photobucket.com/albums/uu358/colley_2009/?action=view&current=IMG_1535.mp4
This
http://s663.photobucket.com/albums/uu358/colley_2009/?action=view&current=IMG_1538.mp4
And this before going to the pub for a :drink:

and meal

http://s663.photobucket.com/albums/uu358/colley_2009/?action=view&current=IMG_1537.mp4

Picked up a 265/75/16 BFG AT tyre as a spare for when ive got my 16" muds on. :thumbup:

Hipo did the 32" MUDS, go on the front without any mods, apart from taking off Mudflaps....

he had to mod the rear part of the arch quite a bit spike :wink:

look on his members ride
viewtopic.php?f=46&t=35174

Yes as above, I had to cut about an inch extra away from the rear of the front arches (I had previously cut them back, but I cant remember how much by so I cant say how much you need to take out of a unmodded truck, but prolly about 1.5 inches) - Not a hard job with a hammer and a angle grinder

. Infact the hardest part of it is getting the plastic trim to sit right so it looks normal...oh and yeah...loose the mud flaps

Oh and on another note...unless u have at least a 2 inch lift then you'll need a body lift because with my boot full of stuff (thats normal...i never have a empty boot) the rear wheels rub on the top of the arches if I hit speed bumps too quick lol. But its ok offroading because of how the axle twists it tucks the top of the tyres into the arches so they dont (only just) catch

Hope that helps fella

Guys can you keep the techi chat in the techie area pleeeaasseee :thumbup:

Lower suspension 6 inches, fitted a new wider body kit, under car neons quad turbo now fitted with kick in supercharger, 100 litre take fitted running pure alcohole giving out 900 BHP ............................................ who just nudged me?????????? LOL nothing else since this afternoon