ABS warning light

[crewpunch]

Hi. After replacing discs and pads all round plus both outer CV boots on my 2.2dti. I now have the ABS light on, any ideas. Thanks in advance

[gregster]

Might be worth checking the connections for the abs sensors, and check you didnt crack the abs rings when you fitted new discs.

[crewpunch]

Thanks
I suppose I'll have to strip them down and check.

[vauxsqueeks]

Its probably worth while also carefully cleaning up the abs rings and sensor with a wire brush just to remove any dirt, mud etc..

[Hawkmoon]

Crewpunch! if you can test the sensor, put a meter across the 'white' and 'black' connections see if you get a reading of about 2.4 ohms!
See here:
viewtopic.php?f=41&t=11581

If you don't the sensor maybe dead and may need replacing!

I had a sensor (well both) die on me,and thanks to this post:
http://fronteraowners.co.uk/viewtopic.p ... nsor+mazda


I replaced them which looked like this!
viewtopic.php?f=23&t=57692