prices exhaust what have you paid

frontera 2.2 petrol 16v lwb 2000 plate went to kwik fit today has it was blowing from the flexi pipe was told for the back and middle section ie from the cat back £598.
when i picked myself up he says he can do it for £400 i ran away.
rang vauxhall was told £327.
how much have other members paid for theres or can you just tell me were to get one cheap thanks

I am not sure where it is,but Drift posted a link last year for a place that sold a weld in flexi section,try doing a search for that or similar phrases :wink:

hi yeh i tried a search last night but thinking bits stating to go will all drop off soon thanks for reply

Try this guy :wink:

http://stores.shop.ebay.co.uk/Xtreme-St ... QQ_armrsZ1

Someone recently posted that he got a Stainless one for less than that. Fitting is not too hard if you have a way of getting a Fronty high enough off the ground ( or happen to be a very small person or a very clever snake) the wife says "just bribe the kids"
I'm off to look for that post will be back if I find it as it is a: cheaper I think b: lasts longer c: his was bigger bore tube so his fronty went further and faster for less. A whole flock of birds with one stone.

i used these they are the cheapest i could find. it just depends on what part of the midlands your from with regard to traveling.
http://www.chemix-autocentres.co.uk/

The answer is to do an insite search for "stainless steel exhust" this is one that came up. Good luck with it.

Report this postReply with quote new exhaust system
by 4x4paul on Tue Apr 07, 2009 10:57 pm

just got my new stainless steel exhaust system from powerflow fitted to my 3.2 v6 whata noise .........got to be done... was gonna get standered one as old one was knacked until i heard the price .£900 was the cheapest..... and the stainless steel system only cost £350 Attachments
DSCN2058.JPG (49.48 KiB) Viewed 178 times
4x4paul
4WD

Posts: 14
Joined: Thu Aug 07, 2008 12:07 pm
Location: hastings
Model: 3.2 V6 5dr
Registration Year: 1999/T
Modifications: stainless steel exhaust system

soon to get 22" rims ( if i can find some) rear smoked lexus lights and a new diamond black spray job and tune the engin

hit 135mph n shes got more to give....

not bad for a first car

Region: South East
Private messageE-mail

I was desperately trying to save money with mine so welded on patches of steel the rear box and then foolishly paid £50 for just the tailpipe and then saw them on ebay for £15.00!
Its worth looking around if you have the time and I would have put a stainless pipe on but I was in too much of a hurry for some reason and bought the steel one locally.Go for stainless if you can,looks like youve had A good response so far .
Hope you can find something.

thanks for all the replys will check them out botched it up with some bits from halfords at the moment

Have you tried Milner Offroad?
Paid just over £110 mark for new replacement silencer boxes and tailpipe for a 2.2 Petrol LWB A - supply only and fit yourself. If you go down this route it would be worth sourcing a new internal fixing seal/ring from the place that Drift gave a link to in this post. It's seal the connection from the front of silencer boxes to the cat pipe and is very brittle. The original can easily be broken one removal. Also there a 2 rubber mounts positioned roughly under the rear passenger door area. On the one that I did I would have benefitted from gripping the rubber mount with mole grips and then undo the top and bottom nuts respectively. Thinking it was a bolt all the way through, I made the mistake of gripping the top nut with a spanner and undoing the bottom nut with the socket resulting in the mounts being broken in half. In my case, the bolts were independant of each other and were held together by the rubber in the middle.

here you go mate

http://cgi.ebay.co.uk/FRONTERA-2-2-16V- ... 1|294%3A50

Hi Kendo111164

some of the guys have had some success from these people when looking for a cheap exhaust Cheap Exhaust

Good Luck

In the midlands would recommend http://www.tiptopperformance.co.uk. Full hand made custom exhaust, had a Vectra SRI 2.2 done not so long ago, cost the same as VX for a performance exhaust with lifetime guarantee, if going for standard stainless steal would have been about £50 less.

Hi try this place www.catman.co.uk nice bloke done me a good turn 2 weeks ago.
Dazza.

BUT the thing is ; if you are going to replace an exhaust and you can improve performance and save money both on the exhaust and on fuel consumption then do it because it looks like a lot of money but when you total up the fuel bills even if it is even steven you are at least getting somewhere smoother and a bit quicker.
OOPS does this only apply to diesels.

i have used these a few times,
http://www.cesuk.com/

hi thanks for all your advice i rang tiptopperformance this morning asked if they could do it today .
they said yes in about a hour it took me that long to get there
stainless steel £299 fitted very good service custom built to fit car. it took 2hours to build and fit.
thanks again for all your help