EGR valve
11 posts
• Page 1 of 1
tried replacing said valve but would not fit got one bolt in but other refused to line up then noticed it was angled to the block as the other one was angled away to the firewall does the whole unit need replacing or can you change the top.
-
TESCO.COM - 2WD
- Posts: 7
- Joined: Mon Jun 09, 2008 2:56 pm
- Location: Dudley, West Midlands
- Model: 2.2i 5dr
- Registration Year: 1997/P
- Vehicle Name: TAZ
- Region: Midlands
Re: erg valve
by Sir-Doris on Thu Jun 26, 2008 3:30 pm
Think the whole unit needs replacing.
-
Sir-Doris - Sir Dong
- Posts: 7391
- Joined: Wed Oct 31, 2007 1:16 am
- Location: Powys, Wales
- Model: 2.2i 5dr
- Registration Year: 1995/N
- Vehicle Name: The Old Girl
- Modifications: Blanked EGR Valve
265/75/16 Marix Lions
Pro-Comp Steering Stabiliser
Rough Country Shocks
+ 5" Suspension Lift
UCA Ball Joint Spacers + Low Profile Bump Stops
Stainless Extended Braided Brake Lines
1.5" Body Lift
CB
Lowered Front Diff Hangers
Grooved and Dimpled Front Brake Discs
Front and Rear Recovery Loops
Petrol Cap on a String
Secondary Air
Injection System Removed
Removed Front ARB
Soon to have 5.13:1 Diff's
Got the Diff's just need to fit em - Region: Mid Wales
Re: erg valve
by TESCO.COM on Thu Jun 26, 2008 3:41 pm
did you notice the spelling mistake thanks for your reply i will try again
-
TESCO.COM - 2WD
- Posts: 7
- Joined: Mon Jun 09, 2008 2:56 pm
- Location: Dudley, West Midlands
- Model: 2.2i 5dr
- Registration Year: 1997/P
- Vehicle Name: TAZ
- Region: Midlands
Re: erg valve
by alex on Thu Jun 26, 2008 5:15 pm
What engine?
Fronty no.4, pimp mobile Treg 3.2 LWB lifted 2.5"
Fronty no.5 2.8 swb hd coils +2" 31"machos.
Fronty no.5 2.8 swb hd coils +2" 31"machos.
-
alex - The Battering Ram
- Posts: 4625
- Joined: Wed Mar 14, 2007 4:18 pm
- Model: 3.2 V6 5dr
- Registration Year: 1999/T
- Modifications: 3.2v6 LWB lifted on 31"at's "The Pimp mobile"
2.8 LWB
5" supension lift,
Body lift,
Manual hubs,
33" mudders,
Fixed Flywheel,
B&Q snorkle,
Flipped ball joints,
Procomp steering shocker,
Modified front bump stops,
Exhaust recirc removed,
EGR removed,
Cat removed,
Front diff lowered,
Dislocation cones,
Spring retainers,
Buckets 4 point harness,
The biggest cb twig you can get.
"The Beast" - Region: Midlands
Re: erg valve
by Trugga on Thu Jun 26, 2008 8:40 pm
-
Trugga - Da Prof!
- Posts: 6258
- Joined: Thu Aug 11, 2005 9:46 pm
- Location: West Midlands (UK)
- Model: 2.0i Sport 3dr
- Registration Year: 1994/L
- Vehicle Name: Little Blue Bug
- Modifications: # ARB Winch bumper
# Wireless operated Warn Winch
# Jackable rockslider sills
# Safety Devices roll cage
# Roof level tree bars
# Roof mounted waffle boards
# Underbody protection
# Smaller, higher fuel tank
# Buttock tuck with protectors
# Cobra Aqua4x4 competition seats
# 3-point harnesses
# Terratrip
# GTE digital dash
# Bonnet pins
# AVM manual front hubs
# FIA battery master switch
# Ally Chequerplate footwells
# De-Cat, straight thro' zorst
# 2" Lift, +2" Rough Country shocks - Region: Midlands
Re: erg valve
by TESCO.COM on Sat Jun 28, 2008 2:17 pm
the engine is a 2.2i petrol p reg . only using a library computer so i am now and again able to answer
-
TESCO.COM - 2WD
- Posts: 7
- Joined: Mon Jun 09, 2008 2:56 pm
- Location: Dudley, West Midlands
- Model: 2.2i 5dr
- Registration Year: 1997/P
- Vehicle Name: TAZ
- Region: Midlands
Re: EGR valve
by Sir-Doris on Sun Jun 29, 2008 1:49 am
same engine as mine (more or less) so yes, the egr valve is a sealed unit. probably around the hundred quid mark from vauxhall possibly + VAT. They are available on ebay from time to time for 50 to 80 quid.
-
Sir-Doris - Sir Dong
- Posts: 7391
- Joined: Wed Oct 31, 2007 1:16 am
- Location: Powys, Wales
- Model: 2.2i 5dr
- Registration Year: 1995/N
- Vehicle Name: The Old Girl
- Modifications: Blanked EGR Valve
265/75/16 Marix Lions
Pro-Comp Steering Stabiliser
Rough Country Shocks
+ 5" Suspension Lift
UCA Ball Joint Spacers + Low Profile Bump Stops
Stainless Extended Braided Brake Lines
1.5" Body Lift
CB
Lowered Front Diff Hangers
Grooved and Dimpled Front Brake Discs
Front and Rear Recovery Loops
Petrol Cap on a String
Secondary Air
Injection System Removed
Removed Front ARB
Soon to have 5.13:1 Diff's
Got the Diff's just need to fit em - Region: Mid Wales
Re: EGR valve
by john (smifffy) on Sun Jun 29, 2008 10:18 am
you could try these people they might be able to help with new one not sure on price's
http://www.emissioncontrols.co.uk/page. ... 0%20Valves
http://www.emissioncontrols.co.uk/page. ... 0%20Valves
cheers
-
john (smifffy) - Lord frontera
- Posts: 6604
- Joined: Fri Nov 05, 2004 10:37 pm
- Location: dunstable bedfordshire
- Model: 2.2i 5dr
- Registration Year: 1996/N
- Modifications: 1996 2.2 16v diamond pack
2014 new astra 2.2 SRI cdti SS sports tourer - Region: East Anglia
Re: EGR valve
by f8rdy on Sun Jun 29, 2008 1:23 pm
ive got the EGR Valve and ignition module off a 2.0 vectra X20XEV if that would be any good for you? Anyone know if they match?
Its used and cant guarantee that its working but didnt have any probs i was aware of when i took it off the car.
Its used and cant guarantee that its working but didnt have any probs i was aware of when i took it off the car.
- f8rdy
- Senior Frontera Engineer
- Posts: 156
- Joined: Wed Jan 30, 2008 9:23 pm
- Location: Cardiff, Wales
- Model: 2.2i 5dr
- Registration Year: 1999/V
- Modifications: 2.0 16v Engine Transplant, CB Fitted, Wrap Around Bullbar (Irmscher?), Grey Painted Wheels, Shiny Red Valve Caps!
NOTE: Although my fronty is on a V plate, its a Frontera 'A' shape (as its an Opel) and has the dash with the radio at the top!
Re: EGR valve
by Sir-Doris on Mon Jun 30, 2008 2:13 am
Compare pics, I know that the 2liter xe engine uses the same one.
-
Sir-Doris - Sir Dong
- Posts: 7391
- Joined: Wed Oct 31, 2007 1:16 am
- Location: Powys, Wales
- Model: 2.2i 5dr
- Registration Year: 1995/N
- Vehicle Name: The Old Girl
- Modifications: Blanked EGR Valve
265/75/16 Marix Lions
Pro-Comp Steering Stabiliser
Rough Country Shocks
+ 5" Suspension Lift
UCA Ball Joint Spacers + Low Profile Bump Stops
Stainless Extended Braided Brake Lines
1.5" Body Lift
CB
Lowered Front Diff Hangers
Grooved and Dimpled Front Brake Discs
Front and Rear Recovery Loops
Petrol Cap on a String
Secondary Air
Injection System Removed
Removed Front ARB
Soon to have 5.13:1 Diff's
Got the Diff's just need to fit em - Region: Mid Wales
Re: EGR valve
by f8rdy on Mon Jun 30, 2008 6:08 pm
its very slightly different to the one i had on my 2.2 but thats because mines an opel so for some reason they used a different part!
- f8rdy
- Senior Frontera Engineer
- Posts: 156
- Joined: Wed Jan 30, 2008 9:23 pm
- Location: Cardiff, Wales
- Model: 2.2i 5dr
- Registration Year: 1999/V
- Modifications: 2.0 16v Engine Transplant, CB Fitted, Wrap Around Bullbar (Irmscher?), Grey Painted Wheels, Shiny Red Valve Caps!
NOTE: Although my fronty is on a V plate, its a Frontera 'A' shape (as its an Opel) and has the dash with the radio at the top!
11 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 54 guests