// Frontera Technical Support • View topic - 2.8/3.1 4JB1T/4JG2 ENGINE PARTS WANTED
   
 

2.8/3.1 4JB1T/4JG2 ENGINE PARTS WANTED

Frontera's/Cars etc all adverts will be deleted after 28 days unless they are renewed

2.8/3.1 4JB1T/4JG2 ENGINE PARTS WANTED

Postby bhcalcutta on Thu Jan 18, 2018 3:41 pm

Has anybody got a knackered 2.8 or 3.1 Isuzu engine kicking about that they might be willing to sell some parts off?

I basically need the bottom auxillary belt pulley, the flange that sits behind this, the crankshaft timing gear, woodruff key & bottom timing cover.

I'll gladly buy these parts off anyone, or a full engine if close enough.

Any help will be greatly accepted & rewarded

BH (Pat)
User avatar
bhcalcutta
How Many Posts
How Many Posts
 
Posts: 420
Joined: Fri Jul 27, 2012 9:57 pm
Location: Not far from Bolton, Lancashire
Model: 2.8 TDI 5dr
Registration Year: 1996/N
Vehicle Name: charlieOSCARvictor
Modifications: 31" muds on yota surf alloys with custom paint
Intek CB
Kenwood head unit
wound up torsion bars
monroe adventure front shocks
avm manual lockers
+3" Defender 90 300lb rear coils
+2" Procomp ES9000 rear shocks
Prototype silicone turbo hoses
Modified TLC80 Snorkel
Trooper clutch
flappy paddle delete
egr delete
Region: North West



Re: 2.8/3.1 4JB1T/4JG2 ENGINE PARTS WANTED

Postby bhcalcutta on Mon Jan 22, 2018 5:31 pm

To clarify, the part I urgently need is pictured below, along with the woodruff key if possible
You do not have the required permissions to view the files attached to this post.
User avatar
bhcalcutta
How Many Posts
How Many Posts
 
Posts: 420
Joined: Fri Jul 27, 2012 9:57 pm
Location: Not far from Bolton, Lancashire
Model: 2.8 TDI 5dr
Registration Year: 1996/N
Vehicle Name: charlieOSCARvictor
Modifications: 31" muds on yota surf alloys with custom paint
Intek CB
Kenwood head unit
wound up torsion bars
monroe adventure front shocks
avm manual lockers
+3" Defender 90 300lb rear coils
+2" Procomp ES9000 rear shocks
Prototype silicone turbo hoses
Modified TLC80 Snorkel
Trooper clutch
flappy paddle delete
egr delete
Region: North West



Re: 2.8/3.1 4JB1T/4JG2 ENGINE PARTS WANTED

Postby snapper on Thu Jan 25, 2018 11:49 pm

I may well have one, see message
This posting may have been helpfull, on the other hand probably not... Either way, I may have had drink when posting it in which case it's probably not as helpfull as it could have been

Work safe, and remember all technical problems can be resolved with a hammer, the trick is knowing where to hit it and how big a hammer to use (I often find it may also help to have a spare bit in the shed to replace the bit you have just mullered ;) )

Work in Progress (or not as the case may be) I give you.... 'O-no' the truck.

Comments on 'O-no' the truck may be left here

Work in Progress (or not as the case may be) I give you.... 'Truck'

Comments on 'Truck' the truck may be left here

Owning a 2.8 is a hobby in it's self...
User avatar
snapper
Lord frontera
Lord frontera
 
Posts: 2162
Joined: Sat Mar 27, 2010 1:32 am
Location: Oxfordshire, Brize Norton.
Model: 2.8 TDI 5dr
Registration Year: 1995/N
Vehicle Name: Truck and O-no
Modifications: -
2.8 TD LWB - Truck:
Side Steps Removed
EGR, Birds Nest & Both Butterfly Valves Removed
Particulate Filter removed and pipe welded in
Safari Snorkel fitted
Trooper Flywheel & Clutch fitted
Trooper LSD Rear Axle fitted
Winch Bumper & Winch fitted
3.1 Engine Fitted
2" Suspension Lift

2.8 TD LWB - O-no:
Standard, for now.

2.5 Volvo 850 Saloon:
Standard
Region: South East



Re: 2.8/3.1 4JB1T/4JG2 ENGINE PARTS WANTED

Postby bhcalcutta on Fri Jan 26, 2018 6:15 pm

Thanks Frank, I've replied.

Part now acquired, so this can be deleted
User avatar
bhcalcutta
How Many Posts
How Many Posts
 
Posts: 420
Joined: Fri Jul 27, 2012 9:57 pm
Location: Not far from Bolton, Lancashire
Model: 2.8 TDI 5dr
Registration Year: 1996/N
Vehicle Name: charlieOSCARvictor
Modifications: 31" muds on yota surf alloys with custom paint
Intek CB
Kenwood head unit
wound up torsion bars
monroe adventure front shocks
avm manual lockers
+3" Defender 90 300lb rear coils
+2" Procomp ES9000 rear shocks
Prototype silicone turbo hoses
Modified TLC80 Snorkel
Trooper clutch
flappy paddle delete
egr delete
Region: North West



Re: 2.8/3.1 4JB1T/4JG2 ENGINE PARTS WANTED

Postby snapper on Fri Jan 26, 2018 10:48 pm

And I just stripped the engine from the flywheel end to get the thing off lol....
This posting may have been helpfull, on the other hand probably not... Either way, I may have had drink when posting it in which case it's probably not as helpfull as it could have been

Work safe, and remember all technical problems can be resolved with a hammer, the trick is knowing where to hit it and how big a hammer to use (I often find it may also help to have a spare bit in the shed to replace the bit you have just mullered ;) )

Work in Progress (or not as the case may be) I give you.... 'O-no' the truck.

Comments on 'O-no' the truck may be left here

Work in Progress (or not as the case may be) I give you.... 'Truck'

Comments on 'Truck' the truck may be left here

Owning a 2.8 is a hobby in it's self...
User avatar
snapper
Lord frontera
Lord frontera
 
Posts: 2162
Joined: Sat Mar 27, 2010 1:32 am
Location: Oxfordshire, Brize Norton.
Model: 2.8 TDI 5dr
Registration Year: 1995/N
Vehicle Name: Truck and O-no
Modifications: -
2.8 TD LWB - Truck:
Side Steps Removed
EGR, Birds Nest & Both Butterfly Valves Removed
Particulate Filter removed and pipe welded in
Safari Snorkel fitted
Trooper Flywheel & Clutch fitted
Trooper LSD Rear Axle fitted
Winch Bumper & Winch fitted
3.1 Engine Fitted
2" Suspension Lift

2.8 TD LWB - O-no:
Standard, for now.

2.5 Volvo 850 Saloon:
Standard
Region: South East




Return to Fronteras Wanted

Who is online

Users browsing this forum: No registered users and 2 guests

 
   


cron