//
2011 BBQ & Spanner Party June 25th
Forum rules
Disclaimer: Please understand that the Frontera Owners Group or any organiser of events will not be held responsible for any loss, damage, accident or injury caused by attending an event. You are responsible for your passengers and for your own safety and should carry the necessary recovery and safety equipment. You agree to follow the rules of the Highway Code, Green Lane Code and club pay and play site rules whichever applies. For greenlane events; All events should adhere to the GLASS Code of Conduct, and please note that Rights Of Way often change and if a TRO (traffic regulation order) has been put in place by the local council you should not drive the lane. If you do not agree to the above you should refrain from taking part in the event. Re: 2011 BBQ & Spanner Party June 25thStarts at 10 John and according to the forcast Saturday is 21c no rain.
Comments on Betsy here please!!! viewtopic.php?f=115&t=56282
Bobster!!!! Frontera's do it better in MUD!!! West Midlands Area Rep Its here, the FOG Annual Meet 2014 viewforum.php?f=123
Re: 2011 BBQ & Spanner Party June 25thWeather for st5 postcode for Sat. Cloudy with light rain and 15c
EDIT: It would appear Bobby uses a more optimistic weather service to the one I do
Re: 2011 BBQ & Spanner Party June 25thSaturday Day
cloudy High Temperature: 16°C RealFeel®: 17°C View the Hour-By-Hour™ Forecast Winds: SSW at 11km/h Wind Gusts: 30 km/h Maximum UV Index: Moderate (3) Thunderstorm Probability: 0% Amount of Precipitation: 0.0mm Amount of Rain: 0.0mm Amount of Snow: 0.00cm Hours of Precipitation: 0 Hrs Hours of Rain: 0 Hrs Saturday Night low clouds Low Temp: 14°C RealFeel®: 14°C View the Hour-By-Hour™ Forecast Winds: WSW at 6km/h Wind Gusts: 22 km/h Min UV Index: N/A Thunderstorm Probability: 0% Amount of Precipitation: 0.0mm Amount of Rain: 0.0mm Amount of Snow: 0.00cm Hours of Precipitation: 0 Hrs Hours of Rain: 0 Hrs Jay
FOG Admin & IT Techincal Consultant ---------------------------------------------------------------------------------------------------- Annual Meet 2012 | 1996 2.8TDi LWB | Comments on my Fronty | CRAG | Marshalling ---------------------------------------------------------------------------------------------------- There are 10 kinds of people in this world - those who understand binary, and those who don't Please let me know if anything I say offends you. I may want to offend you again in the future
Re: 2011 BBQ & Spanner Party June 25thCheers Jay. Were putting up a tarpaulin for people to sit under or just stand and drink and on the grass area we will put up another one like last year for working under.
Bobster. Comments on Betsy here please!!! viewtopic.php?f=115&t=56282
Bobster!!!! Frontera's do it better in MUD!!! West Midlands Area Rep Its here, the FOG Annual Meet 2014 viewforum.php?f=123
Re: 2011 BBQ & Spanner Party June 25thhopefully the weather will hold out and we will have a good day as my missus is already started with if its raining i am not going talk so lets hope it is sunny in the morning so i can get out of the street as i wont be turning back once i leave he he hee
Re: 2011 BBQ & Spanner Party June 25thHmm, did you just mention work there Bobby? scary...
Jobs to do list.... 1. n/s u/j boot (not that important so long a I don't go swimming the thing or use the 4 wheel drive cos it's an 'A' series and only goes round when in 4 wheel drive). 2. Both lower ball joints, probably something I should do soon, getting a wee bit fed up of the squeaking now. Should do the boot at the same time, but that would be sensible. 3. Tappits, not been done for oh how many miles? gotta be headed to 50k so I guess I should do them sooner than later, not that you would notice the difference in clatter, it is a 2.8 after all 4. New spots for the front cos one fell off, it died well..... 5. New front & rear discs n pads, not needed yet but on the list all the same to do over the next 6 months. 6. Replace gearbox mount (apart from the stealers where can you get one, do milners sell them? ). Got all the bits less the disks, pads, gearbox mount and spots. Think I will do the disks and ball joints at the same time as the u/j boot and it's probably not a good idea to do them 120 miles away from home either just in case something breaks so that just leaves the tappits and spots, oh and gearbox mount if I can find a good un between now and sat. This posting may have been helpfull, on the other hand probably not... Either way, I may have had drink when posting it in which case it's probably not as helpfull as it could have been
Work safe, and remember all technical problems can be resolved with a hammer, the trick is knowing where to hit it and how big a hammer to use (I often find it may also help to have a spare bit in the shed to replace the bit you have just mullered ) Work in Progress (or not as the case may be) I give you.... 'O-no' the truck. Comments on 'O-no' the truck may be left here Work in Progress (or not as the case may be) I give you.... 'Truck' Comments on 'Truck' the truck may be left here Owning a 2.8 is a hobby in it's self...
Re: 2011 BBQ & Spanner Party June 25thAny MUA gearbox mount should do it
Ste
FOG Administrator Frontera Technical Support Often Imitated Never Bettered http://www.fronteraowners.co.uk Its here, the FOG Annual Meet 2014 viewforum.php?f=123
Re: 2011 BBQ & Spanner Party June 25thBobby we still on for it me old tator
BIG BOYZ WITH BIGGER TOYZ
Man who walk around with hands in pockets feel cocky all day !!!!!!!! Member 5876
Re: 2011 BBQ & Spanner Party June 25thYES Mark its still a big go!!!!!!!!!!!!!! Hope to see you if your comming matey????????
Comments on Betsy here please!!! viewtopic.php?f=115&t=56282
Bobster!!!! Frontera's do it better in MUD!!! West Midlands Area Rep Its here, the FOG Annual Meet 2014 viewforum.php?f=123
Re: 2011 BBQ & Spanner Party June 25thWell I got a caliper on the back of the truck this afternoon so I should be a deffo for this tomorrow
Dunno what it's like in ST5 but it's hissing down here
Re: 2011 BBQ & Spanner Party June 25thhad sun all day here with mild clouds looking good for tomorrow.
let me know before the morning if i need to bring anything other than refreshments ok. Last edited by BoxCleva on Fri Jun 24, 2011 6:11 pm, edited 1 time in total.
Reason: edited.
Re: 2011 BBQ & Spanner Party June 25thWell people Horses45 and Arora will be at the BBQ/Spanner Party as his truck is now fixed!!!
Comments on Betsy here please!!! viewtopic.php?f=115&t=56282
Bobster!!!! Frontera's do it better in MUD!!! West Midlands Area Rep Its here, the FOG Annual Meet 2014 viewforum.php?f=123
Re: 2011 BBQ & Spanner Party June 25thThat is a fine thing to hear, well done guys
Ste
FOG Administrator Frontera Technical Support Often Imitated Never Bettered http://www.fronteraowners.co.uk Its here, the FOG Annual Meet 2014 viewforum.php?f=123
Re: 2011 BBQ & Spanner Party June 25thi could of picked them up if needed be he only had to ask as only going to be 3 in my car and it is not that far out of my way
get the rain out of the way tonigth and then all good for tomorrow. so what is the current shedule of works bobby do we have one. any priority jobs seen one list for one of the trucks just wondered if you had a big list yet
Re: 2011 BBQ & Spanner Party June 25thMy welding, by the main man
I may even bring another modification along I have been meaning to do for a while Ste
FOG Administrator Frontera Technical Support Often Imitated Never Bettered http://www.fronteraowners.co.uk Its here, the FOG Annual Meet 2014 viewforum.php?f=123
Re: 2011 BBQ & Spanner Party June 25thegr's on mine, but i need to get some high temp sealant
flying solo, weeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
Re: 2011 BBQ & Spanner Party June 25thWell its here!!!!! Ben a bit wet over night but gonna start to pick up throughout the day. A great big welcome to all that come to the event and make it a great day like last year.
Regards Bobster and Chrissy. My main job is the welding of Drifty's sill's then it will be a free for all for my time and body!!!! Comments on Betsy here please!!! viewtopic.php?f=115&t=56282
Bobster!!!! Frontera's do it better in MUD!!! West Midlands Area Rep Its here, the FOG Annual Meet 2014 viewforum.php?f=123
Re: 2011 BBQ & Spanner Party June 25thBobby, you got any high temp sealant
flying solo, weeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
Re: 2011 BBQ & Spanner Party June 25thbacon butties eaton and work clothes in a bag just waiting for the passengers to get there act together so i can get some lpg in before i set off.
so see you around 10ish bring on the sunshine
Re: 2011 BBQ & Spanner Party June 25thOn my way in 15 minutes via McDonalds
Ste
FOG Administrator Frontera Technical Support Often Imitated Never Bettered http://www.fronteraowners.co.uk Its here, the FOG Annual Meet 2014 viewforum.php?f=123
Who is onlineUsers browsing this forum: No registered users and 3 guests | ||||||||||||||||||