|
by RatCav on Sun Apr 26, 2015 3:23 pm
Generator dropped off. Will find out mid to late next week for the results.
-

RatCav
- Super Trooper

-
- Posts: 5577
- Joined: Thu Mar 19, 2009 11:20 am
- Location: Preston, Lancs.
-
Vehicle Name: Banshee
-
Modifications: Its a Frontera that is heavily disguised as a Mk.1 LWB Isuzu Bighorn 2.8TD Lotus Edition.
Hi-roof modification. EGR valves and birds nest of vacuum pipes removed. Front Manual Locking Hubs. Rear Limited Slip Differential. Yota Surf steels, with custom paintjob. (cheers Gregster) 33x12.5" R15 General Grabber AT 2's. +2" suspension lift. +3" body lift. Cat 1 Thatcham approved alarm. Irmscher wheel arch flares. Full body restoration/respray. (cheers Gregster again!)
-
Region: North West
by snapper on Sun Apr 26, 2015 6:46 pm
Talking of Gen-Set's I have a spare one that I will bring along if needed.
At 800W It's not the largest on the block and sadly has a two stroke engine as well (50/1 mix) but it should be enough to put a bit of life back into a caravan battery or run the telly so the wife can keep up with the soaps.... Might have an issue with a 2kW kettle mind...
Just taken it out the box so I've never run it in anger and havent a clue how long it will keep going on the massive 4 ltr tank of fuel either. I will however give it test run during the week.
Anyway, it's there if anyone needs it. First come, first served and all that. Oh and the user is responsible for the fuel that goes in it.... I will provide a fuel can and the 2 stroke oil. Plus training if needed.
This posting may have been helpfull, on the other hand probably not... Either way, I may have had drink when posting it in which case it's probably not as helpfull as it could have been Work safe, and remember all technical problems can be resolved with a hammer, the trick is knowing where to hit it and how big a hammer to use (I often find it may also help to have a spare bit in the shed to replace the bit you have just mullered  ) Work in Progress (or not as the case may be) I give you.... 'O-no' the truck.Comments on 'O-no' the truck may be left hereWork in Progress (or not as the case may be) I give you.... 'Truck'Comments on 'Truck' the truck may be left hereOwning a 2.8 is a hobby in it's self...
-

snapper
- Lord frontera

-
- Posts: 2171
- Joined: Sat Mar 27, 2010 1:32 am
- Location: Oxfordshire, Brize Norton.
-
Model: 2.8 TDI 5dr
-
Registration Year: 1995/N
-
Vehicle Name: Truck and O-no
-
Modifications: -
2.8 TD LWB - Truck: Side Steps Removed EGR, Birds Nest & Both Butterfly Valves Removed Particulate Filter removed and pipe welded in Safari Snorkel fitted Trooper Flywheel & Clutch fitted Trooper LSD Rear Axle fitted Winch Bumper & Winch fitted 3.1 Engine Fitted 2" Suspension Lift
2.8 TD LWB - O-no: Standard, for now.
2.5 Volvo 850 Saloon: Standard
-
Region: South East
by 2much on Sun Apr 26, 2015 11:37 pm
stretch wrote:Does anyone have a 110v transformer they could bring?
Let me know if you still need 110 tf or not as i should be able to sort one. What are u using it for?
-

2much
- frontera God

-
- Posts: 710
- Joined: Tue May 16, 2006 6:58 pm
- Location: Kent
-
Model: 2.8 TDI Sport 3dr
-
Registration Year: 1995/N
-
Modifications: 2much!
-
Region: South East
by RatCav on Tue Apr 28, 2015 10:05 am
Genny isn't going to be back in time buddy. Apologies, but apparently it needs a closer look at.
-

RatCav
- Super Trooper

-
- Posts: 5577
- Joined: Thu Mar 19, 2009 11:20 am
- Location: Preston, Lancs.
-
Vehicle Name: Banshee
-
Modifications: Its a Frontera that is heavily disguised as a Mk.1 LWB Isuzu Bighorn 2.8TD Lotus Edition.
Hi-roof modification. EGR valves and birds nest of vacuum pipes removed. Front Manual Locking Hubs. Rear Limited Slip Differential. Yota Surf steels, with custom paintjob. (cheers Gregster) 33x12.5" R15 General Grabber AT 2's. +2" suspension lift. +3" body lift. Cat 1 Thatcham approved alarm. Irmscher wheel arch flares. Full body restoration/respray. (cheers Gregster again!)
-
Region: North West
by stretch on Tue Apr 28, 2015 8:34 pm
RatCav wrote:Genny isn't going to be back in time buddy. Apologies, but apparently it needs a closer look at.
2much wrote:stretch wrote:Does anyone have a 110v transformer they could bring?
Let me know if you still need 110 tf or not as i should be able to sort one. What are u using it for?
Never mind chaps it was going to be for some lighting that I won on ebay but I won't have it in time for the annual 
-

stretch
- Rain cloud of doom

-
- Posts: 3053
- Joined: Wed Jul 18, 2007 3:26 pm
- Location: Ipswich
-
Model: 2.2 DTI 5dr
-
Registration Year: 2000/W
-
Vehicle Name: F.I.T.T
-
Modifications: 12v feed in boot
Truckputer under construction Front & rear recovery points De side stepped
-
Region: East Anglia
by snapper on Tue Apr 28, 2015 11:01 pm
What were you planning on lighting mate?
This posting may have been helpfull, on the other hand probably not... Either way, I may have had drink when posting it in which case it's probably not as helpfull as it could have been Work safe, and remember all technical problems can be resolved with a hammer, the trick is knowing where to hit it and how big a hammer to use (I often find it may also help to have a spare bit in the shed to replace the bit you have just mullered  ) Work in Progress (or not as the case may be) I give you.... 'O-no' the truck.Comments on 'O-no' the truck may be left hereWork in Progress (or not as the case may be) I give you.... 'Truck'Comments on 'Truck' the truck may be left hereOwning a 2.8 is a hobby in it's self...
-

snapper
- Lord frontera

-
- Posts: 2171
- Joined: Sat Mar 27, 2010 1:32 am
- Location: Oxfordshire, Brize Norton.
-
Model: 2.8 TDI 5dr
-
Registration Year: 1995/N
-
Vehicle Name: Truck and O-no
-
Modifications: -
2.8 TD LWB - Truck: Side Steps Removed EGR, Birds Nest & Both Butterfly Valves Removed Particulate Filter removed and pipe welded in Safari Snorkel fitted Trooper Flywheel & Clutch fitted Trooper LSD Rear Axle fitted Winch Bumper & Winch fitted 3.1 Engine Fitted 2" Suspension Lift
2.8 TD LWB - O-no: Standard, for now.
2.5 Volvo 850 Saloon: Standard
-
Region: South East
by mudman1988 on Wed Apr 29, 2015 2:38 pm
Should be able to run lighting from my geny and it a silent one so we will be able to talk instead of shouting
-
mudman1988
- my other cars a frontera

-
- Posts: 255
- Joined: Sat Feb 22, 2014 9:23 pm
- Location: kent
-
Model: 2.8 TDI Sport 3dr
-
Registration Year: 1996/N
-
Vehicle Name: Victor
-
Modifications: 2" spring lift with full dislocation on the rear
Quick disconnect kit for front anti roll bar mud tyres (31/10.50/15 insa turbo super special tracks) Light bar Winch bumper and winch with in cab control Ass tuck Rear tow bumper Cb Side exit exhaust Egr delete Snorkel
-
Region: South East
by stretch on Wed Apr 29, 2015 6:00 pm
ahh is it 110v then?
-

stretch
- Rain cloud of doom

-
- Posts: 3053
- Joined: Wed Jul 18, 2007 3:26 pm
- Location: Ipswich
-
Model: 2.2 DTI 5dr
-
Registration Year: 2000/W
-
Vehicle Name: F.I.T.T
-
Modifications: 12v feed in boot
Truckputer under construction Front & rear recovery points De side stepped
-
Region: East Anglia
by mudman1988 on Wed Apr 29, 2015 6:41 pm
I'm sure it's got 2 output I know one is 230v but I'm not sure on the other
-
mudman1988
- my other cars a frontera

-
- Posts: 255
- Joined: Sat Feb 22, 2014 9:23 pm
- Location: kent
-
Model: 2.8 TDI Sport 3dr
-
Registration Year: 1996/N
-
Vehicle Name: Victor
-
Modifications: 2" spring lift with full dislocation on the rear
Quick disconnect kit for front anti roll bar mud tyres (31/10.50/15 insa turbo super special tracks) Light bar Winch bumper and winch with in cab control Ass tuck Rear tow bumper Cb Side exit exhaust Egr delete Snorkel
-
Region: South East
by RatCav on Wed Apr 29, 2015 7:42 pm
If it is round and blue it is 240V. If it is round and yellow it is 110V
-

RatCav
- Super Trooper

-
- Posts: 5577
- Joined: Thu Mar 19, 2009 11:20 am
- Location: Preston, Lancs.
-
Vehicle Name: Banshee
-
Modifications: Its a Frontera that is heavily disguised as a Mk.1 LWB Isuzu Bighorn 2.8TD Lotus Edition.
Hi-roof modification. EGR valves and birds nest of vacuum pipes removed. Front Manual Locking Hubs. Rear Limited Slip Differential. Yota Surf steels, with custom paintjob. (cheers Gregster) 33x12.5" R15 General Grabber AT 2's. +2" suspension lift. +3" body lift. Cat 1 Thatcham approved alarm. Irmscher wheel arch flares. Full body restoration/respray. (cheers Gregster again!)
-
Region: North West
by mudman1988 on Wed Apr 29, 2015 10:08 pm
Cool I'll have a look but it won't be till Friday as it's up.my dad's in my caravan, so not much help sorry
-
mudman1988
- my other cars a frontera

-
- Posts: 255
- Joined: Sat Feb 22, 2014 9:23 pm
- Location: kent
-
Model: 2.8 TDI Sport 3dr
-
Registration Year: 1996/N
-
Vehicle Name: Victor
-
Modifications: 2" spring lift with full dislocation on the rear
Quick disconnect kit for front anti roll bar mud tyres (31/10.50/15 insa turbo super special tracks) Light bar Winch bumper and winch with in cab control Ass tuck Rear tow bumper Cb Side exit exhaust Egr delete Snorkel
-
Region: South East
by 2much on Mon May 04, 2015 10:09 am
Camo seat cover link as few people interested.....
[url][/http://www.ebay.co.uk/itm/Blue-Camouflage-Camo-Waterproof-Car-Van-Seat-Covers-Free-P-P-/251601483904?pt=LH_DefaultDomain_3&hash=item3a949df880url]
-

2much
- frontera God

-
- Posts: 710
- Joined: Tue May 16, 2006 6:58 pm
- Location: Kent
-
Model: 2.8 TDI Sport 3dr
-
Registration Year: 1995/N
-
Modifications: 2much!
-
Region: South East
Users browsing this forum: No registered users and 1 guest
| |